User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
16 | 66
A6V11881627_en_i
When defining or changing the custom name of the device, it will only affect the
display name in the cloud.
5. A message will appear that the device was successfully added.
When defining or changing the custom name of the device, it will only affect the
display name in the cloud.
Assigning distributions
After adding and activating the device, you will need to assign the distribution to
enable Building Operator Discovery. To assign a distribution to the device, follow
the steps below.
Assigning a distribution set will only need to be done once. The assign distribution
pop-up will only appear after adding a device in a site. If you do not assign a
distribution, this pop-up will appear until the device is assigned a distribution.
 In Asset Manager: