User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
A6V11881627_en_i
17 | 66
1. In the sites tab, select the site with the Connect device you want to assign a
distribution to.
2. In the list of devices, select the device.
3. Navigate to the Applications tab. A pop up will appear.
4. In the pop-up, select the distribution set and distribution version. Click Save.
5. After saving, a message will indicate if the distribution was successfully
assigned.
Updating distributions
To update a distribution on a device, follow the steps below.
 In Asset Manager:
1. In the sites tab, select the site with the Connect device you want to install an
application on.
2. In the list of devices, select the device.
3. Navigate to the Applications tab.
4. To update the distribution, click Update.