User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
A6V11881627_en_i
19 | 66
4. Click Update to confirm.
5. After the update is downloaded and installed, a message will appear on the
screen when the device is successfully updated.
The operating system update could take approximately 20 minutes depending on
your network bandwidth. Ensure that the download rate of your network
bandwidth is at least 8Mbit/second, or else the update will likely time out. Wait
before proceeding to the next step.
If you update the operating system, you’ll be logged out of the Connect Device
Interface.
 (Optional) In Connect device:
◈
Navigate to the Maintenance tab in Connect device to follow the software
update in real-time.