User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
20 | 66
A6V11881627_en_i
1.2.5 Verifying the Registration State and Software Updates
 (Optional) In Connect device:
1. To check the status of all applications on the Connect device, select the
Operation tab in the top navigation bar.
2. Select the caret icon to expand the Applications menu. Ensure all applications
have green dots next to their names. You will also note that Cloud Connectivity
is “Connected” and Registration State is “Operational”, respectively.
If you update Building Operator Discovery operating systems, you’ll be logged out
of the Connect Device interface.
1.2.6 Configuring the Connect Device Firewall
Once you’ve ensured cloud connectivity and updated the latest gateway
application software to the Connect device, you must next configure the firewall
rules. By default, there is no inbound traffic allowed on the device. You must open
the ports so the Connect device can communicate with the building automation
network.
The Building Operator Discovery operating system must finish updating before you
configure the firewall rules in Connect device (as outlined in the section above).
To manually configure the Connect device:
1. Select the Network tab. Then, select the Firewall header.
2. Create the following inbound rules for: