User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
24 | 66
A6V11881627_en_i
The Building Operator Discovery Tool and Connect device are pre-configured to
work. You do not need to edit these fields.
Gateway software must be version 4.0.5 or higher to use the Remote Access
Web Feature for Building Operator Discovery.
1.2.9 Selecting Data Point Settings
 In Building Operator:
◈
The Display Settings select whether you see the BACnet object name or
BACnet object description as the primary identifier for the device’s data points.
See below for how devices are displayed by name and description in Building
Operator. Display by Name on the left, and display by Description on the right.
◈
Select Save to confirm.