User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_i
25 | 66
1.3 Adding Data Points Using Building Operator
Discovery
Building Operator Discovery is an engineering tool embedded on Connect device
to configure and provision data points for Building Operator.
1.3.1 Logging in to Building Operator Discovery Remotely
You can log in to Building Operator Discovery remotely, or locally. The instructions
below outline how to log in remotely. To log in locally, use a local port or network
cable. The tunnel will close the session after one hour, even if you are actively
working.
Gateway software must be version 4.0.5 or higher to use the Remote Access
Web Feature for Building Operator Discovery.
 In Building Operator
1. Select the Site name to access the Site page. In the site page, find and select
the Remote Web Access icon in the vertical navigation bar.
2. Next, find and select Building Operator Discovery in the list. Click Connect to
proceed.
3. Wait for the connection to verify.