User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
30 | 66
A6V11881627_en_i
1.3.3 Discovering a BACnet Device
After you've added a floor object, you can now discover a device. In doing so, you
can add that device to the Building Operator Discovery project and sync it with
Building Operator. Complete the instructions below to discover a BACnet device.
Discover a BACnet Device
1. Find and expand Connectors in the Navigation tree. Here you will see the
following device connection options:
– BACnet
– Haystack (not currently used)
– Modbus
2. Select to expand the appropriate device type. For example, select BACnet to
discover a BACnet device.
3. (Optional) If your BACnet device is not located in the same IP range as the
Connect device, you will need to add the BACnet device manually. First, select
BACnet, then select + Add.
4. (Optional) In the pop-up, add values in the following fields:
– Display Name
– Host
– Device Instance