User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_i
31 | 66
5. (Optional) Select Add.
6. Select Discover beneath the device type. At the bottom of Added Devices
(there will be no list results if you haven’t added anything yet), select Discover.
7. Find and select the appropriate device(s) in the list results.
8. Select + Add, and then OK in the confirmation pop-up.
9. (Optional) Before you add a device, select Discovery Settings. In the Device
Discovery Settings, you can enter custom local addresses as needed (for
specific devices).
Building Operator only allows for BACnet networks on ports 47808 – 47823.