User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
36 | 66
A6V11881627_en_i
3. Select the plus icon (+) below the available objects pane, then select Add
Equip.
4. In the pop-up, type to enter the equipment name. This name will appear in
Building Operator as the Device Name. We strongly recommend you label the
equipment as the same name as it is on the BACnet network.
5. Select Create.
Immediately after an equipment has been added in the Building Operator
Discovery, it is also populated in Building Operator.
To see this reflected in Building Operator:
1. Open a new tab in the browser and log in to Building Operator.
2. Select the site name to access the site page.
3. Here you’ll see the new device in Building Operator that you added in Building
Operator Discovery.