User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_i
39 | 66
3. Select Delete [Point or Equipment Name].
4. Select Delete in the ensuing pop-up to confirm.
5. Navigate to Building Operator and see that the point was successfully deleted
from that device.
6. If you’re deleting equipment, navigate to the device in Building Operator. Find
and select the delete icon (see below). This is not applicable for data points.
1.3.7 Adding Tags to Data Points
Now that you have added points to the device, you can configure and tag these
points to meet specific criteria. There are two types of tags in Building Operator
Discovery, both of which we’ll detail below.
Building Operator Discovery will automatically apply some tags for you based on
the point data type.