User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
44 | 66
A6V11881627_en_i
11. When the two required fields have been filled out, select Apply.
Meter Tags
Meter tags will allow you to view energy consumption values as bar charts in
Building Operator. The meter tag should be applied to points that are connected to
accumulator style points.
If a Siemens Intelligent Valve is being integrated into Building Operator via
Connect X300 instead of directly to the cloud, then the meter tag should be applied
to the following four points:
● Total cooling energy
● Total cooling volume flow
● Total heating energy
● Total heating volume flow
To add a meter tag in Building Operator Discovery:
1. In the Meter Tags section, select the plus icon (+) to expand the tags menu.
2. Enter or scroll to search for the tag(s) you want to attach to this point. Select
the check mark icon to save these changes.