User Manual

Building Operator Engineering Guide

Configuring Alarms in Building Operator Discovery

54 | 66

A6V11881627_en_i

The values you apply in this window will be written to the points selected in the

Alarm Config list.

1.4.1 Configuring Number Alarm

When configuring a Number alarm with a Delta From Setpoint value, follow the

instructions below:

1. Open and launch Alarm Config from the Building Operator Discovery

applications menu.

2. Select the Number point filter, select Number Alarm in the Alarm Configuration

drop-down, then select Add/Edit.

3. In the pop-up, change the value(s) in the fields provided to meet the

parameters for your point alarm. In the Compare Point Name field, copy and

paste the NavName of the point you want to compare to. The point you want to

compare to, must exist within the same equip as the point the alarm is being

configured for.

The Compare Point Name field is case sensitive.

4. Select OK when finished.