BUP2 7 day 12/4/07 1:29 AM Page 1 Introduction This booklet will give you easy to follow instructions to allow you to set your BUP2 Programmer to the 7 Day, (different times every day) program.
BUP2 7 day 12/4/07 1:29 AM Page 2 BUP2 7 Day Mon Tue Wed Thu Fri Sat Sun 12:00 PM 2P Display will flash as shown at first installation
BUP2 7 day 12/4/07 1:29 AM Page 3 How do I change/set the day and clock? • Press top middle button display shows • Alter day using +/buttons to scroll, when correct day is shown press left hand button ENTER display shows • Alter time using +/buttons, when correct time is shown press left hand button ENTER, press right hand button BACK then press right hand button again EXIT display shows Mon 12:00 PM SET THE DAY ENTER +/- BACK Mon 12:00 PM SET THE TIME ENTER +/- BACK 3:37 HW CH OFF OFF MENU
BUP2 7 day 12/4/07 1:29 AM Page 4 How do I change/set the ON/OFF times? • Press left hand button MENU 3:37 HW CH 3:37 PM SET CH SELECT BACK 3:37 CH 8:30 SET 1st SELECT (continued on next page) PM MAN MAN MENU • Press top middle button until SET PROGRAM is shown Press left hand button SELECT display will show SET CH • Press left hand button SELECT display will show SET MONDAY alter day using top middle button , when correct day is shown press left hand button SELECT display shows OFF OFF PM
BUP2 7 day 12/4/07 1:29 AM Page 5 To change 1st ON time for CH press SELECT, time will flash, change times by using +/- , when desired time is in the display press ENTER display will show 12:00 SET THE TIME ENTER +/- BACK 3:37 • Repeat as above until last OFF time for CH is entered, press right hand button BACK, display will show press middle top button SET HW is shown, repeat as above until all HW times have been entered, if you want to go to next day press top middle button and repeat as above if n
BUP2 7 day 12/4/07 1:29 AM Page 6 How do I review the current ON/OFF times? • Press left hand button MENU, press top middle button until REVIEW PROG is shown • Press left hand button SELECT display shows Press VIEW, MONDAY shows press VIEW • 1st ON time for Central Heating (CH) will be shown (continued on next page) 3:37 HW CH OFF OFF PM MAN MAN REVIEW PROG SELECT EXIT CH PROGRAM VIEW BACK 10:30 AM CH VIEW 1st ON BACK
BUP2 7 day 12/4/07 1:29 AM Page 7 • Press top middle button 1st OFF will be shown • Continue above action until all times have been reviewed, press right hand button BACK. Press bottom middle button to view TUESDAY and continue until all days and times for central heating have been reviewed. • Press right hand button BACK twice, then press top middle button HW PROGRAM will be shown, repeat actions as above to review all days and times for Hot Water.
BUP2 7 day 12/4/07 1:29 AM Page 8 How do I copy the ON/OFF times? To copy times from one day to the next...
BUP2 7 day 12/4/07 1:29 AM Page 9 • Press SELECT, continue pressing SELECT until all days you want to copy are entered COPY TUE➞WED SELECT BACK • Press right hand button BACK • Press top middle button SET HW will be shown, repeat previous instructions to copy HW days and times COPY SAT➞SUN SELECT BACK • Press right hand button BACK • Press right hand button EXIT to return to MENU The copy option can be used after completion of any days programming 3:37 CH OFF MENU PM MAN
BUP2 7 day 12/4/07 1:29 AM Page 10 What do the switching options mean? AUTO This means that the BUP2 will switch ON and OFF according to the programmed times MANUAL OFF This means that the BUP2 will be permanently OFF MANUAL ON This means that the BUP2 will be permanently ON ONCE This means that the BUP2 will switch ON at the first ON time and switch OFF at the last OFF time you have programmed ignoring any ON/OFF times in between. This is also referred to as All Day.
BUP2 7 day 12/4/07 1:29 AM Page 11 3:37 How do I select my four switching options? PM SET STATUS SELECT EXIT • Press left hand button MENU Display shows • Press left hand button SELECT Display shows CH STATUS SELECT BACK • Press bottom middle button your selection is displayed (CH, HW or CH+HW) until • Press left hand button SELECT Display shows (continued on next page) MANUAL OFF ENTER BACK
BUP2 7 day 12/4/07 1:29 AM Page 12 • Press top middle button until correct switching option is displayed MANUAL OFF ENTER BACK AUTO* MANUAL OFF* MANUAL ON* ONCE* *see previous page for details • Press left hand button ENTER, repeat for other selections (HW, CH etc) CH+HW STATUS SELECT BACK • Press right hand button BACK • Press right hand button EXIT Display shows 3:37 HW CH OFF OFF MENU PM MAN MAN
BUP2 7 day 12/4/07 1:29 AM Page 13 How do I change winter and summer times? • Press left hand button MENU 3:37 HW CH OFF OFF PM MAN MAN MENU • Press top middle button until SET DAY/TIME is shown • Press left hand button SELECT • Set day of the week using +/buttons, when correct day is shown press left hand button ENTER • Alter time using +/buttons, when correct time is shown press left hand button ENTER, press right hand button BACK then press right hand button again EXIT to return to MENU display
BUP2 7 day 12/4/07 1:29 AM Page 14 How do I set my holiday program? • Press left hand button MENU • Press top middle button until SET HOLIDAY is shown • Press left hand button SELECT display shows number of holiday days will flash, change amount of days (1-99) by using +/- , when desired amount of days is in the display press left hand button ENTER, then right hand button EXIT to return to MENU 3:37 CH OFF PM MAN MENU 3:37 CH OFF PM MAN SET HOLIDAY SELECT EXIT 20 ADJUST DAYS ENTER +/- BACK
BUP2 7 day 12/4/07 1:29 AM Page 15 How do I activate my holiday program? • Press left hand button MENU SET STATUS is shown, press SELECT • Press top middle button until HOLIDAY is shown • Press left hand button SELECT display will flash as shown your system is now in HOLIDAY mode (OFF) and will countdown the amount of days you have set it for, at the end of which it will automatically go back to your normal set program. You can also press CANCEL to return to normal program mode.
BUP2 7 day 12/4/07 1:29 AM Page 16 What do the buttons do? ADV (ADVANCE) This brings forward the next switching time, for example:(a) if your times were ON 7am and OFF 9am - ON 5pm and OFF 10pm and you pressed the ADV at 4pm your heating would come ON straight away and go OFF at 10pm. (b) if your times were ON 7am and OFF 9am - ON 5pm and OFF 10pm and you pressed the ADV at 9pm your heating would go OFF straight away and come ON at 7am the next morning.