User Manual

Dipswitches
To change the dipswitch positions first switch off the mains supply and then
remove the unit from its backplate by simply loosening the two screws and
pulling towards you.
To select the dipswitch position for Daily Programming dipswitch 1 should
be up and 2, 3 & 4 should be down.
To select the dipswitch position for Weekday/Weekend Programming
dipswitches 1, 3 & 4 should be down and 2 should be up.
To select the dipswitch position for 7 Day Programming dipswitches 1, 2 & 4
should be down and 3 should be up.
Dipswitch 5 can be either up or down depending on your system type,
down for gravity, up for fully pumped.
When you have completed the changes to the dipswitches, replace the unit
onto its backplate and then refer to the booklet supplied with the unit that
relates to the programme you have selected:-
Daily Programming.
Weekday/Weekend Programming.
7 Day Programming.
These booklets will help you to programme your programmer easily and quickly.
BUP2 installation instructions 14/4/07 11:39 AM Page 2