C384FA-M LCD-Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm BETRIEBSANLEITUNG OPERATING MANUAL
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an unseren Help Desk (siehe Garantiekarte). Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact our Help Desk (see Warranty Card). The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English C384FA-M LCD-Bildschirm LCD monitor Moniteur LCD Monitor LCD Monitor LCD LCD-skärm LCD-beeldscherm Farvebilledskærm Français Español Italiano Svenska Nederlands Dansk Betriebsanleitung Operating Manual Ausgabe März 2001 March 2001 edition TCO'99
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Copyright ã Fujitsu Siemens Computers GmbH 2001 Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................2 Important notes .................................................................................................................................2 Safety ................................................................
Introduction Your new LCD (Liquid Crystal Display) monitor C384FA-M offers numerous features and functions, for example: • • • • • • • • • • • • • • • • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim housing optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) high degree of brightness and good contrast high resolution (1024x768) for displaying the information content of a conventiona
Colour monitor C384FA-M Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! i Ê Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. Supplementary information, remarks, and tips follow this symbol. Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms.
Colour monitor C384FA-M • • • • • • • • Please ensure that no objects (e. g. necklaces, paperclips etc.) or liquids can get into the interior of the device (this may cause an electrical shock or short circuit). In emergencies (e. g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our customer service centre. The screen background lighting contains mercury.
Colour monitor C384FA-M Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor C384FA-M is designed to conserve electricity by dropping to less than 5 W when it goes into standby, suspend and OFF mode. With this new power management the C384FA-M qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5% percent of all business electricity and it is growing rapidly.
Colour monitor C384FA-M Important note on power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. · · · · The female/male receptacles of the cord set must meet CEE-22 requirements. The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors.
Colour monitor C384FA-M Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: LCD Monitor Trade Name: Fujitsu Siemens Computers Model Number(s): CM350 Name of Responsible Party: COMPAL ELECTRONICS, INC.
Colour monitor C384FA-M i It is recommended not to throw away the original packing material. Keep it for future transportation. Installing an ergonomic video workstation Window Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advises when installing a video workstation.
Colour monitor C384FA-M Connecting cables to the monitor The monitor ports are protected by a cover. Ê Ê Remove the rear monitor cover (1). Remove the upper cover of the monitor base (2). 1 DC-IN 12V 1 = D-SUB connector 2 = AUDIO IN socket 2 3 3 = Socket for power supply The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the computer.
Colour monitor C384FA-M Ê Plug the power adapter cable into the power connector (3) of the monitor. i Ê Ensure proper cable routing so that the cover of the monitor base can be mounted again. Refit the rear monitor cover and the upper cover of the monitor base. Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer.
Colour monitor C384FA-M Ê Ê Connect the plug on the power cable supplied into a properly grounded mains outlet (4). Plug the power connector of the computer into a properly grounded mains outlet. i When you start working with your monitor for the first time you should install the appropriate graphics drivers for your application software. Details of how to do this are provided in the documentation on your screen controller/the associated driver software.
Colour monitor C384FA-M i If your computer has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter. Notes on power management If your computer is equipped with power management, the monitor can support this function fully.
Colour monitor C384FA-M Monitor settings using the OSD menu You can use the buttons on the control panel to set the screen display via an integrated OSD menu (On-Screen-Display). The OSD menu is available in five languages (default setting: English). How you set a different language for the OSD menu is described in the section "Setting the language for the OSD menu". i 2 1 ! " [Fn] Activate the OSD menu with the buttons (1) and select a function (symbol or submenu).
Colour monitor C384FA-M A26361-K826-Z100-2-5E19 English - 13
Colour monitor C384FA-M Performing auto-adjustment Carry out auto-adjustment of the monitor for the current resolution (Auto Adjustment) Setting position for the OSD menu Moving OSD menu horizontally (OSD H-Position) Moving OSD menu vertically (OSD V-Position) Setting text format Select resolution for text display (Graph Text) 640 x 400 for Japan (Graph) 720 x 400 for other countries (Text) Activating the factory settings Factory settings are available for Image Lock, picture position and colours in the
Colour monitor C384FA-M Save settings and terminate the OSD menu Save settings and terminate the OSD menu (Save + Exit) Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
Colour monitor C384FA-M Accessories: data cable (1.5 m) power cable (1.8 m) Storable display modes: 13 (preset) Electrical data Synchronisation: analogue, positive, 0.7 Vpp, 75 Ω Separate Sync. TTL, positive or negative Horizontal frequency: 24 kHz .... 61 kHz (multi-scanning) Video: Refresh rate: 56 Hz ....
Colour monitor C384FA-M Preset operating modes i The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the screen controller used, it may be necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor"). Horizontal frequency Refresh rate Screen resolution 31.47 kHz 31.47 kHz 31.47 kHz 31.47 kHz 37.86 kHz 37.50 kHz 35.16 kHz 37.88 kHz 48.08 kHz 46.87 kHz 48.
Colour monitor C384FA-M Pin assignment D-SUB 5 1 6 10 15 11 Pin Meaning Pin Meaning 1 Video input red 9 +5V 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground Error handling Should an error occur, first check the following points.
Colour monitor C384FA-M No display (power indicator lights) Ê Ê Check whether the computer is switched on. Ê Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Check whether the data cable for the monitor is correctly attached to the monitor and the monitor port on the computer. Alter the brightness and/or contrast until you get a picture.
