- C384FA-M OPERATING MANUAL

Colour monitor C384FA-M
16 - English A26361-K826-Z100-2-5E19
Accessories: data cable (1.5 m)
power cable (1.8 m)
Storable display modes: 13 (preset)
Electrical data
Video: analogue, positive, 0.7 V
pp
,75Ω
Synchronisation: Separate Sync. TTL, positive or negative
Horizontal frequency: 24 kHz .... 61 kHz (multi-scanning)
Refresh rate: 56 Hz .... 75 Hz
Maximum pixel rate: 70 MHz
Power supply: 100-240 V
Total power consumption: < 25 W (ON, Normal mode)
< 5 W in the energy-saving mode (standby mode, suspend
mode and OFF mode)
Audio data
Audio input: Stereo jack
Sound output: 1 W left, 1 W right
Connector for headphones: 3.5 mm jack, max. 50 mW
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
15 °C .... 35 °C
20 % .... 85 %
Limit range of operation:
Humidity:
5 °C .... 35 °C
20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor C384FA-M is not yet displayed in the list of monitors, you can select one of
the following monitors instead:
C383FA, C381FA, 3814 FA