User guide

Notes A-Z
79
C62 en, A31008-H6880-A1-1-7619 (13. February 2004, 15:46)
© Siemens AG 2003, I:\Mobil\L55\C62_Squirrel_(mc)\en\fug\_von_itl\C62long_A-Z.fm
Set Divert
§Divert§ Diverts the caller to the
mailbox, for example, if
divert Busy (page 69) is
set and the Call waiting
function (page 69) is
activated.
SIM card problems
If you have inserted your SIM card
and despite this, the following mes-
sage appears:
Please insert your SIM card!
Please ensure that the card is
correctly inserted and the contacts
are clean; if necessary, clean them
with a dry cloth. If the card is
damaged, please contact your
service provider.
See also "Questions & Answers"
page 82.
SMS status report
If the phone was unable to send the
message to the service centre, a
retry option is available. If this
attempt also fails, contact your
service provider.
The confirmation Message sent! only
indicates transmission to the service
centre, which then tries to deliver
the message within a certain time-
frame.
See also "validity period", page 51.
Software version
To display the software version of
your phone in standby mode enter:
*
# 0 6 #, then press §Info§.
Switch ringtones on/off/beep
* Hold down.
In standby mode
All sounds (including the ringtone)
can be switched off and then on
again.
You can also select §Beep§.
During a call
Switch off the ringtone only for the
current call/alarm (not if "Any key an-
swer" page 68 is active): Accepting
or refusing the call ends this func-
tion.
• The call will still be displayed.
• The silent alert remains active if it
has been switched on previously.
Two phone numbers
Special settings can be given to each
phone number (e.g. ringtone, call di-
vert, etc.). Switch to the required
number first.
To switch the phone number/line in
standby mode:
0 Press.
§Line 1§ Press.
L