Operation Manual

Calling26
© Siemens AG 2003, \\Itl.eu\muc\Projekte_6\Siemens\ICM_MP_CCQ_S_UM_RUST\10210-001_vor-Ort-Einsatz\Produkte\C75_Aries\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050718
left page (26) of C75 Aries, FUG, w/o ptt, 143mm, en, A31008-H6970-A1-2-7619 (23.09.2005, 12:10)
When the new connection is
established:
§Swap§ Swapping between calls.
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 83). During a call, you may be ad-
vised that there is another call wait-
ing. You will hear a special tone dur-
ing the call. You have the following
options:
• Accept the waiting call in addition
to the first
§Swap§ Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap be-
tween the two calls.
• Reject the waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is divert-
ed, for example, to the
mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
Ending call(s)
B
Press the End key.
After the Return to held call? display,
you have the following selection:
§Yes§
You accept the call on hold.
§No§ You end the 2nd call.
Conference b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been
established:
§Options§
Open menu and select
Hold. The current connec-
tion is maintained.
J
Now dial a new number.
When the new connec-
tion is established …
§Options§ … open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
End
B
All calls in the multiparty
conversation are ended
when the End key is
pressed.