Operation Manual

89Setup
© Siemens AG 2003, \\Itl.eu\muc\Projekte_6\Siemens\ICM_MP_CCQ_S_UM_RUST\10210-001_vor-Ort-Einsatz\Produkte\C75_Aries\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050718
right page (89) of C75 Aries, FUG, w/o ptt, 143mm, en, A31008-H6970-A1-2-7619 (23.09.2005, 12:10)
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually. In this case, you
will receive the necessary data
from the service provider or via
the "Setting Configurator" at
(page 119):
www.siemens.com/
mobilephonescustomercare
Select profile
I
Select the profile.
C
Confirm selection.
Set profile
I
Select the profile.
§Options§
Open menu.
§Edit§ Open the selection.
I
Select CSD settings, and/or
GPRS settings.
§Edit§ Select service and enter
data (see below).
§Save§ Save settings.
CSD settings (Circuit Switched Data)
GPRS settings (General Packet Radio
Service)
You can only start to use GPRS once
you have activated GPRS on your
phone (page 88).
Dial-up
number:
Enter ISP number.
Call type:
Select ISDN or ana-
logue.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
DNS 2 (opt.):
(optional).
APN:
Enter service provider
address.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
DNS 2 (opt.):
(optional).