User's Manual

Functions
4.8 Optimizing a Cam
CamTool
4-28 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Limit values
The limits of the interpolation curve for the transition are displayed here.
You can set the following parameters:
Table 4-3 Parameters in the Type tab (Interpolation Curve Properties window)
Field/button Explanation/instructions
Position
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.
Velocity
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.
Acceleration (v > 0)
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.
Acceleration (v < 0)
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.