User's Manual

Siemens PLT 130
.
1994
4/9
Bus converter unit UI
Description and ordering data
1 LED ET (green), flashes in rhythm with the messages received
from the remote bus
2 LED F (red), signals faults (line protocol faulty, transfer element
format faul ty)
3 LED B (green), indicates setting of module on bus B
4 LED A (green), indicates setting of module on bus A
5 Reset key RS
6 LED SV (green), signals the presence of all operating
voltages
7 Coding jumper
8 Power supply unit
9 Bus i nterface
10 Inductive coupler
Fig. 4/9 Bus converter 6DS4 400-8AB
Application
To convert signals from a 20-m local bus to a 4-km remote bus.
Signal coupling-in and coupling-out inductive and without feed-
back.
Design
The bus converter consists of 3 single-height modules.
Front panel width:
Power supply unit 30.48 mm = 2 standard slots
Bus interface 15.24 mm = 1 standard slot
Inductive coupler 45.72 mm = 3 standard slots
The bus interface module has a 20-m local bus interface and
constitutes the input of the bus converter . The inductive coupler
module has 2 lengths of coaxial cable fixed to the front panel.
These are screwed onto the connector board AF (page 4/10)
and form the connection to the remote bus cable.
Possible plug-in locations:
AS 235 K automation system, basic unit
AS 235 automation system, power distribution subrack in the
basic cabinet
AS 235 H automation system, power distribution subrack in
the basic cabinet
Remote bus connection unit (e. g. for OS 520 and OS 265-3
desk-top units)
Remote bus connection subrack (e. g. for SIMATIC S5-155 U,
SICOMP industry-standard PC or OS 265-3 rack-type version)
Bus coupler (BK-FF).
1)
Redundant 24 V supply only when a remote bus connection subrack
6DS4 426--8AA is used
Fig. 4/10 Bus converter, function diagram
Technical data
Power supply DC 24 V (20 to 33 V)
Current consumption 450 mA
Module fuse 1.6 A medium-slow
Interfaces
-- Local bus
-- R e m o t e b u s
TTL level, open collector, asymmetric,
redundant
Biphase signals
(levels approx. á 1V)
Signal coupling-in inductive, reaction-free
Weight Approx. 1.18 kg
Ordering data
Order No.
Bus conver ter (UI), 6DS4 400-8AB
consisting of power supply unit, bus interface
and i nductive coupler
Instructions
Bus converter, inductive Order No
German C79000--B8000--C4
English C79000--B8076--C4
French C79000--B8077--C4
Spanish C79000--B8078--C4
Created with "Chameleon CMYK PDF Creator" for Wolfgang Strozyk at Siemens AG
This catalog is out of date, see note on page 2