Security Camera User Manual

Installation

Siemens Building Technologies

Fire Safety & Security Products 05.2009

7.1.2 Internet connection with static IP

Choose this connection type if you are required to use a static IP for the network

camera and proceed as follows.

1. Set up the network camera in the LAN (see chapter

8.5.2).

2. Go to Configuration > Network > Network Type.

3. Select LAN > Use fixed IP address.

4. Enter the static IP, Subnet mask, Default router, Primary DNS provided by

your ISP.

7.1.3 Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line

(see chapter

8.5.1: PPPoE setting).