Security Camera User Manual

Safety
5
Siemens Building Technologies
Fire Safety & Security Products 05.2009
1 Safety
1.1 Target readers
Target readers Qualification Activity Condition of the
product
End user Has working knowledge
of computers.
Instruction by technical
specialists is necessary.
Performs only the
procedures for proper
operation of the
product.
The product is installed
and configured.
Service personnel Technical training for
electrical installations.
Checks the product at
regular intervals to
ensure that it is in good
working order and
performs service work.
Product already in use
and requiring servicing.
1.2 General safety precautions
z Read the general safety precautions before installing, configuring and operating
the device.
z Please also read the safety precautions for the devices that are operated by the
software. Further information on this can be found in the Manuals for the
respective devices.
z Keep this document for reference.
z Always pass this document on together with the product.
z Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
z Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
z The unit operates on frequencies that are approved for use in the European
Union. When used outside the EU, the national regulations for the use of
frequencies must be observed.
1.2.1 Transport
Damage during transport
z Keep the packaging material for future transportation.
z Do not expose the device to mechanical vibrations or shocks.
1.2.2 Installation of the device
z It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
z Refer installation to a qualified electrician.
z When handling modules that are susceptible to electrostatic discharge, please
observe the ESD guidelines.