Security Camera User Manual

Configuration with the CCIC1410 Homepage
82
Siemens Building Technologies
Fire Safety & Security Products 05.2009
log-recording tool to receive system log messages from the network camera. For
example "Kiwi Syslog Daemon".
1. Open the CCIC1410 Homepage (see chapter
9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item System log.
4. Choose the desired settings.
5. Click Save.
9.14.2 Current log
This column displays the entries in the system log in chronological order. The
system log is stored in the network camera’s buffer area and will be overwritten
when the capacity of the log is reached.
1. Open the CCIC1410 Homepage (see chapter
9.1).
2. Choose the Configuration menu.
3. On the left hand side, choose the menu item System log.
Î The information in the Current Log is displayed.
9.15 View parameters
The Parameter List lists the entire system’s parameters in alphabetical order. If
you need technical assistance, please provide the information listed in this page.