User Manual

Cerberus Division
Configuration
8[34]
Data and design subject to change without notice. Supply subject to availability
© Copyright by CERBERUS AG, CH-8708 Männedorf, Switzerland 1995
02.99 e1754.doc
The drop down list presents
all the subsystems currently
available
Fig. 3-3
If you choose LOOP on a line, a field appears that let you key in the MK7022 address
that acts as an interface toward the loop.
3.1 How to create a new configuration
From the File menu, select New. The data currently configured will be cleared and a
new configuration will be started.
3.2 How to save the current configuration
From the file menu, select Save. A file dialog box will be shown. Select the directory
where you wish to save the data and key in the name of the file. The file suffix for
configuration data file must be cnf.
Fig. 3-4
3.3 How to load an existing configuration
From the File menu, select Load. A file dialog box will be shown. Select the directory
where the file you wish to load is and click on OK. The file suffix must be cnf.