User Manual

Cerberus Division

Make file ABS

e1754.doc

Data and design subject to change without notice. Supply subject to availability

land 1999

02.99 13

5 Make file ABS

In order to generate the ABS file that could be downloaded to the EPROM, you

should :

• save the CNF file created with the GW-21 Configuration program

• run the GW21_CNF program. This is a DOS program described in the following

section of this manual

• create the EPROM using the ABS file generated by the GW21_CNF program

5.1 How to use the GW21_CNF program

From the main menu you must choose first the "Make Eprom" option.

You are presented with a list of possible links and you can select one of them by typ-

ing the number or the letter listed on the left side of the link name.

The message in the lower part of the screen informs you that the file CONFIG.BAS is

automatically included in the link if it is present in the directory.

After you chose the link, the software starts generating the ABS file. Some progress

messages are shown and then you are returned to the main menu.

This process creates a text file with the suffix ABS that contains the EPROM code in

hexadecimal format and a BIN file. Here there is an example of some lines of the ABS

file

S014000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFfb

S2140000003E1830C30001FFFFFFFFFFFFFFFFFFFFab

S214000010FFFFFFFFFF052E242D02112E112E9747fe

S214000020574D4F46FFFFFFFFFFFFFFFFC3966CFFd6

S214000030FFFFFFFFC3D94BFFC34000FFC3874BFF43

S2140000403E80D3B0C34400FFFFFFFFFFFFFFFFFF6c

S214000050FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFab

. . . . . . . . .