User Manual

11
Siemens Building Technologies
Cerberus Division
e1148c
06.2000
7 Dip-switches description
JUMPER FUNCTION VALUE
S1.1 Configuration
S1.4 subsystem type UART 1
S1.5 subsystem type UART 1
S1.6 subsystem type UART 1
S1.7 baud rate UART 1
S1.8 baud rate UART 1
S2.1 baud rate UART 1
S2.2 subsystem type UART 2
S2.3 subsystem type UART 2
S2.4 subsystem type UART 2
S2.5 baud rate UART 2
S2.6 baud rate UART 2
S2.7 baud rate UART 2
S2.8 subsystem type UART 3
S3.1 subsystem type UART 3
S3.2 subsystem type UART 3
S3.3 baud rate UART 3
S3.4 baud rate UART 3
S3.5 baud rate UART 3
S3.6 subsystem type UART 4
S3.7 subsystem type UART 4
S3.8 subsystem type UART 4
S4.2 baud rate UART 4
S4.3 baud rate UART 4
S4.4 baud rate UART 4
BAUD RATE
UART Spare 9600 4800 2400 1200 600 300 150
1 S1.7 ON OFF ON OFF ON OFF ON OFF
S1.8 ON ON OFF OFF ON ON OFF OFF
S1.9 ON ON ON ON OFF OFF OFF OFF
2 S2.5 ON OFF ON OFF ON OFF ON OFF
S2.6 ON ON OFF OFF ON ON OFF OFF
S2.7 ON ON ON ON OFF OFF OFF OFF
3 S3.3 ON OFF ON OFF ON OFF ON OFF
S3.4 ON ON OFF OFF ON ON OFF OFF
S3.5 ON ON ON ON OFF OFF OFF OFF
4 S4.2 ON OFF ON OFF ON OFF ON OFF
S4.3 ON ON OFF OFF ON ON OFF OFF
S4.4 ON ON ON ON OFF OFF OFF OFF
Subsystem Dip-switches
MSB LSB
no subsystem OFF OFF OFF
CS11/CZ10 OFF OFF ON
CS4/CZ12 OFF ON OFF
S1.1
Configuration by Flash EPROM ON
Configuration by dip-switches OFF
Fig. 9 Dip-switches description