User Manual

6
Fire & Security Products
Siemens Building Technologies Group
01.2004
NK8223 configuration

Branch no.: ______________
Branch number, ranging from 1 to 50



IP address:
_______ . _______ . _______ . _______
Subnet mask:
_______ . _______ . _______ . _______
Default gateway:
_______ . _______ . _______ . _______
IP address, subnet mask and default gateway ad-
dress for the NK8223. Take note of the four 3-digit
numbers (0-255).
Note: The default gateway may not be required (and
left = 0.0.0.0) if the unit is in the same subnet as the
central.


COM1: Control unit:
_____________________________
Protocol:
_____________________________
Baud rate:
_____________________________
Subsystem local address:
_____________________________
Take note of the control unit, subsystem, or interface
unit connected to the serial port (for example, CK11,
MK722, CF-9000), as well as the communication
protocol (such as Cerban, Cerloop, CMX-DL).


COM2: Control unit:
_____________________________
Protocol:
_____________________________
Baud rate:
_____________________________
Subsystem local address:
_____________________________
Take note of the control unit, subsystem, or interface
unit connected to the serial port (for example, CK11,
MK722, CF-9000), as well as the communication
protocol (such as Cerban, Cerloop, CMX-DL).


COM3: Control unit:
_____________________________
Protocol:
_____________________________
Baud rate:
_____________________________
Subsystem local address:
_____________________________
Take note of the control unit, subsystem, or interface
unit connected to the serial port (for example, CK11,
MK722, CF-9000), as well as the communication
protocol (such as Cerban, Cerloop, CMX-DL).