Operating Instructions

Operating Manual of FC18 Controller
A6V10322968_f_en_-- 13 | 6 7
CHAPTER 3 OPERATION
1. INTERFACE
Fig. 3-1 Operation panel
①
LCD
The LCD backlight automatically turns off within the preset time in the idle mode; the preset time can be adjusted in
the parameter setting. Press any key will turn on the LCD again.
②
Printer
There are two indicators and two buttons on the printer panel. Indicator: the green LED indicates power-up state while
the red LED for operation state (on: online; off: offline). Button: SEL (set online/offline), LF (line feed).
③
Key board
¹ Press number keys to enter numbers and characters.
¹ C: Press “C” to cancel or return to the previous menu; Press “OK” to confirm or enter the menu.
¹ : Menu button, press “ ” to show menu.
¹ Press “↓”/“↑” to move the cursor.
¹ Press “←” to delete the previous input.
¹ Press “→” as shortcut key to show the function menu. The operation items of the selected equipment are listed
in the menu according to operator’s user level.
④
Indicators and operation keys
¹ Alarm: Off when there is no fire; on when fire detected; off again when all alarms are cleared and "reset" is
pressed.
¹ Supervision: On when supervision signal is detected; off when the event disappears and “reset” is pressed.