User Manual
Foreign Subsystem Integration - Engineering Guidelines
E1144.DOC
Data and design subject to change without notice. Supply subject to availability
© Copyright by CERBERUS AG, CH-8708 Männedorf, Switzerland 1994
01.94 17[23]
Security point
ALARM NOT
ACKNOWLEDGED
alarm event
alarm reset
Security point
NORMAL
Security point
ALARM
ACKNOWLEDGED
alarm
acknowledge
subsequent
alarm
Fig. 5.3
In order to allow a complete control of the ack and reset functions, LMS modular handles a specific attribute information
associated to each point state.
Basically, besides the 0 to 15 point state value, the change of state" message (and consequently the LMS modular
database) also contains a treatment flag that indicates whether that specific state is:
• normal, i.e. any pending event can be deleted
• abnormal, and ack is necessary or not
• abnormal, and reset is necessary or not
The table below shows the complete list of cases for the LMS modular treatment flag.
Value Status Behaviour
0 normal no acknowledgement command is issued; no reset
command is issued; LMS modular can delete any pending
event.
1 abnormal not to be acknowledged, not to be reset; no
acknowledgement command is issued; no reset command
is issued.
2 abnormal to be acknowledged, not to be reset;
acknowledgementcommand is issued; no reset command is
issued;
3 abnormal not to be acknowledged, to be reset; no acknowledgement
command is issued; reset command is issued;
4 abnormal to be acknowledged, to be reset; acknowledgement
command is issued; reset command is issued