Brochure

Cerberus PRO –
Detectors and peripherals, perfectly connected.
FV922/FV924FC922/FC924FC901
1
2
2
3
4
5
1
Main board and
operator unit
– FCM901-U3
– FCM901-L3 (Canada)
2
Housing
– With back box, door,
window
– FH901-U3
black
– FH901-R3
red
FC901 stand-alone control panel
Main board and operator unit
FCM901-U3
(FCM901-L3 for Canada)
– Interface options for loops,
NACs, relays, aux. power,
communication bus,
city tie/leased line module
– System LCD display, LEDs,
control buttons
– Built in on-board DACT
Order no.: S54433-B101-A1
Order no: S54433-A8-A1
(for Canada)
System operating units FC901
Expansion options FC901
Leased line/city tie module
FCI2020-U1
– Same as FC922/FV924
– Requires separate Leased
Line/City Tie Cable
Order no.: S54400-A57-A1
Leased Line/city tie cable
FCA901-U1
– Required for use with
FCI2020-U1 with FC901
Order no.: S54433-C106-A1
Battery bracket FHA901-U1
– Secures batteries to meet
seismic requirements
Order no.: S54433-B107-A1
Remote peripheral module
FCA2018-U1
– Interface to remote printers
Order no.: S54400-A65-A1
PAL-1
– UL listed parallel printer
Order no.: 500-692407
PAD-5 main board
– Addressable NAC expander
Order no.: S54339-A17-A1
PAD-5-CDC
– PAD-5 address NAC expansion
card
– Conventional Detectors Card
Order no.: S54339-A7-A1
PAD-5-CLSA
– PAD-5 address NAC expansion
card
– NAC and Releasing
Order no.: S54339-A6-A1
Housings FC901
Housing FH901-U3
– Black
Order no.: S54433-B103-A3
Housing FH901-R3
– Red
Order no.: S54433-B103-A4
Trim kit FHA902-U1
– Black
Order no.: S54433-B106-A1
Trim kit FHA902-R1
– Red
Order no.: S54433-B106-A2
Universal Enclosure
FTH2073-UA
– For Annun.
Order no.: S54433-A6-A1
Battery Housing
FH2072-UA
– For 18AH batteries
Order no.: S54433-A5-A1
Fire control panel
FC901-R3
Fire system display
FSD901-R3
LED Annunciator
FT2008-R1
RS485
4
Kits FC901
FC901 Electronic kit
FC901-U3
– Contains main board and
operator unit FCM901-U3
and power supply (170 W)
Order no.: S54433-C105-A1
FC901 stand-alone network
Remote peripheral
module FCA2018-U1
PAL-1
PAD-5 main board
PAD-5-CDC
PAD-5-CLSA
Devices
Cerberus PRO
Advanced line
Cerberus PRO
Standard line
Air Duct
Housing
I/O Module
Manual
Pull Station
NACs
– Are connected to automatic fire
detectors that are not easily
accessible or visible
– Contain an indicator lamp unit
with one or two LEDs which will
light up when the connected
detector triggers an alarm
– Backward compatible with H-series detector
– Same footprint as existing Siemens duct housings
– Include optional remote test feature and indicator
– New, improved features include easy installation, improved operating
temperature range, and optional in-duct carbon monoxide (CO) detection
Remote indicators Air duct housings
Air duct housing
with relays
FDBZ492-HR
Order no.:
S54319-B23-A1
Optional water-tight
enclosure NEMA 4X
FDBZ-WT
Order no.:
S54319-B26-A1
Air duct housing
FDBZ492
Order no.:
S54319-B22-A1
Remote test lamp
FDBZ492-RTL
Order no.:
S54319-S27-A1
Weather-proof enclosure
NEMA 3R WP-2000
Order no.:
500-649714
Class X Intelligent Lamp,
Ceiling Mount, Tri-Color
LED with Built-In Isolator
ILED-XC
Order no.:
S54370-B6-A1
Class X Intelligent Lamp,
Wall Mount, Tri-Color LED
with Built-In Isolator
ILED-XW
Order no.:
S54370-B5-A1
Cerberus
TM
PRO Advanced detectors with ASAtechnology
TM
– Advanced multi-criteria fire detector utilizing optical, thermal,
and optional CO sensor
– Extreme immunity to deceptive phenomena while providing
enhanced detection with the industry’s only No False Alarm
Guarantee
– Provide redundant optical and thermal sensors for extraordinary
reliability
– Comply with NFPA 76 (Telecommunication Standard) as a
Very Early Warning Fire Detector (VEWFD) as a result of
high-sensitivity alarm capabilities
– Include a multi-purpose carbon monoxide
(CO) life safety and fire detector
– Selectable as a multi-criteria fire detector and/or a CO life safety
gas detector
– Environmentally friendly “green” detectors, as they are RoHS-
compliant and replace the need for ionization detectors due to
forward/backward light scattering technology
– Provide multiple selectable temperature alarm thresholds,
fixed and rate-of-rise
– Provides optional supervisory temperature & CO (PPM) threshold
capabilities.
– Solution for standard applications with average risk and moderate
potential for deceptive phenomena
– Prevents false alarms thanks to intelligent algorithms
– Thermal detector provides 7 selectable alarm thresholds, fixed
and rate-of-rise.
– Offer wide operating temperature & relative humidity (RH) range
– “Green” detectors, as they are RoHS-compliant, meeting the
standards regarding the restriction of the use of certain
hazardous substances in electrical and electronic equipment
Cerberus
TM
PRO standard detectors
Multi-criteria fire detector
OH921
Order no.:
S54320-F6-A2
Thermal (heat) detector
HI921
Order no.:
S54320-F5-A2
Optical (photoelectric) smoke detector
OP921
Order no.:
S54320-F4-A2
Multi-criteria fire detector
OOH941
Order no.:
S54320-F7-A2
Multi-criteria fire/CO detector
OOHC941
Order no.:
S54320-F8-A2
Compatible with bases belowCompatible with bases below Compatible with bases below
Detector relay base
DB2-HR
Order no.:
S54370-F12-A1
Detector base
DB-11
Order no.:
500-094151
Detector base
DB-11E
Order no.:
500-094151E
Audible base
ABHW-4B
Order no.:
S54320-F13-A1
Ceiling mount
remote lamp RL-HC
Order no.:
500-033230
Wall mount
remote lamp RL-HW
Order no.:
500-033310
Audible base
ABHW-4S, (520Hz)
Order no.:
S54320-F14-A1
– Are for immediate manual actuation of a
fire alarm or an extinguishing process
– Direct alarm actuation by pulling down
locking lever
– For indoor and outdoor applications
– For surface- and recess-mounted feed
lines in easily accessible places
- XMS Series manual station pending ULC
approval, HMS-SA and HMS-2S should be
used in Canada
Manual pull stations and accessories
Single action
manual pull station
XMS-S
Order no.:
S54321-F7-A1
Dual action
manual pull station
XMS-D
Order no.:
S54321-F8-A1
Single action metal
manual pull station
XMS-M
Order no.:
S54321-F19-A1
– Intelligently connect independent, potential-free make-or-break contacts
– Can be independently configured via a fire control panel for status or alarm messages
– Input modules monitor devices responsible for alarm inputs and confirm signals or technical states etc.
– Class X series I/O have built in isolation (replaces the need for HLIM’s)
– Output modules control other equipment, such as door holders, fire dampers, smoke control systems, plant shutdown etc.
– FDCIO422 provides 4 in / 4 out with Class A wiring and AC rated contacts
Line modules
Control point
HCP
Order no.:
500-034860
Conventional
zone module
HZM
Order no.:
500-034850
Class X Intelligent
Test Switch
Wall Plate & Isolator
TSM-1X
Order no.:
S54370-B7-A1
Input/output module
FDCIO422
– 4 inputs, 4 outputs
– Class A and B wiring
Order no.:
S54322-F4-A1
Class X Single Input Monitor
Module with Relay
& Built-In Isolator
XTRI-R
Order no.:
S54370-B1-A1
Class X Dual Input
Monitor Module with
Built-In Isolator
XTRI-D
Order no.:
S54370-B2-A1
Class X Single Input
Monitor Module with
Built-In Isolator
XTRI-S
Order no.:
S54370-B3-A1
Class X Mini Input
Monitor Module
with Built-In Isolator
XTRI-M
Order no.:
S54370-B4-A1
Note: Contact Siemens Tech support for compatible panels.
5
City tie
– FCI2020-U1
– FCA901-U1
(cable)
4
Battery bracket
– FHA901-U1
3
Power supply
– FP2011-U1
170 W, 24 VDC
Power supply (170 W) FP2011-U1
– Incl. connection cable
Order no.: 500-450222
FT2008-U1/RI (with control)
U1: Order no.: S54400-A143-A1
R1: Order no.: S54400-A144-A1
FT2018-U1/R1 (without control)
U1: Order no.: S54433-A1-A1
R1: Order no.: S54433-A2-A1
FT2009-U1/R1 (with control)
U1: Order no.: S54400-A145-A1
R1: Order no.: S54400-A146-A1
FT2019-U1/R1 (without control)
U1: Order no.: S54433-A3-A
R1: Order no.: S54433-A4-A1
Fire System Display FSD901
U3: Order no.: S54433-C102-A1
R3: Order no.: S54433-C102-A2
Note: U3 indicates black
enclosure & R3 indicates red
enclosure for both FSDs and FTs
Other – Power Supply, Annunciators
LED Annunciator
No Control FT2019-U1
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
All rights reserved. Printed in USA 153-SBT-583 (1/20)
©2020 Siemens Industry, Inc.
Siemens Industry, Inc.
8 Fernwood Road
Florham Park, NJ 07932
Tel [phone]
Fax [phone]
Cerberus
®
PRO
Compact Planning Tool
usa.siemens.com/cerberus-pro
When it comes to protecting the things that matter, it matters how you protect them. For fire protection,
Cerberus® PRO provides the answer in a single integrated solution that takes care of every element of
protection. Whether you are protecting a small retail store, commercial building, marine vessel or
complex University campus our Cerberus PRO portfolio offers a complete line of solutions to protect
your facility and the flexible design ensuring it offers the right life safety design for your needs.
Cerberus PRO –
intelligent protection