Environmental Declaration

s
Building Technologies
10-Aug-2010 A5Q00037808-01-78 Page 2 of 2
Materials
Total weight of device
2570 g
Plastics ABS+PC, halogenated FHA7201-A3 cover cap
674 g
Q Silicone rubber, halogenated FCM2012-A1 Keypad
239 g
Q Silicone rubber, halogenated FTO2002-A1 Isolation pad
77 g
PVC rigid, halogenated Flat cable mounting 6 g
Polyester foil Design foil
41 g
Metals Steel, zinc plated FCM2010-A1 support op. Unit
977 g
Steel, zinc plated Screws
25 g
CrNi steel Shielding plate PMI
47 g
Others PBT GF, Be/Cu, PVC 20pol. Cable
6 g
PBT GF, Be/Cu, PVC 34pol Cable
38 g
PCB assembled FR4, TBBA, SnAgCu FCM2027 PMI- & Mainboard
358 g
FR4, TBBA, SnAgCu PCB cpl. FTO2002-A1 LED Ind.
64 g
FR4, TBBA, SnAgCu FCC2006-A1 CPU Modul
18 g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Disposal
The device is classified as waste electronic equipment in terms of the European
Directive 2002/96/EC (WEEE) and should not be disposed of as unsorted munici-
pal waste. The relevant national legal rules are to be adhered to. Regarding dis-
posal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Comments
Environmental Benefits:
- Servers for the early detection of fires and prevents the discharge of toxic gases.
- Easily removable. Disassembling is possible without any important effects regarding waste disposal.
Legal disclaimer: This declaration is for information purposes only
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee
that the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd therefore does not assume liability for any error or for any consequences which may arise from the use of
this information to the maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.