User Manual

Manual call points in C-NET
4.5 Manual call point FDM223 complete with indirect operation
FDM223
Manual call point complete, housing red with
glass , key, switching unit and locking plug
Part no.
A5Q00008098
Documents
Product data sheet
007001
Technical description
007002
Consists of:
– Housing red
– Glass
– Key
– Switching unit
– 2 locking plugs (2 holes)
– 2 labels standard with house and Feuerwehr/Brandmelder
Application
For the immediate manual actuation of a fire alarm.
For indoor and outdoor application, equally suited for wet, humid and dusty areas.
For surface- and recess-mounted feed lines in easily accessible places.
Addressable applicable.
Function
Indirect alarm actuation by smashing in the glass plate and pressing the push button.
To replace the glass plate, open the housing door with the key. The push button must be set back be-
fore closing the door again.
Technical data
Communication protocol
C-NET
Operating voltage
DC 12…33 V
Operating current (quiescent)
200 μA
Ext. alarm indicator
2
Connection terminals
0.28…1.5 mm
2
Operating temperature
-25…+70 °C
Storage temperature
-30…+75 °C
Humidity
≤95 % rel.
Color
red, ~RAL 3000
Protection category EN 60529/IEC 60529
– mit Dichtung DMZ1197-AD
IP44
IP64
System compatibility C-NET
FS720
Standards
EN 54-11, EN 54-17
Dimensions
134.3 x 134.3 x 43.2 mm
Approvals
VdS G204002, LPCB 531k/08
31
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014