User Manual

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel (2L, AU)

Line separator, Input/output modules in C-NET

FDCIO223

Transponder

Part no.

S24218-B102-A1

Documents

Product data sheet

009168

FDCIO223

2 Transzorb diode 20 V

2 x 560 Ω 1 %; 0.25 W

2 x 680 Ω 5 %; 0.25 W

2 x 2,7 kΩ 1 %; 0.35 W

2 x 3,3 kΩ 5 %; 0.25 W

2 Mounting feet

Technical description

009122

Application

For connection of collective fire detectors (GMT/conventional line, GMT/conventional line with shunt-

Zener-diode barrier (SB3) for explosion-hazard areas).

For monitored controls of e.g. smoke dampers, alarm devices, door mAgnets and extinguishing activa-

tion devices (adhere to country-specific instructions).

Monitored signal input for status and alarm messages or for acknowledging technical status.

Addressable applicable.

Function

The 2 inputs/outputs can be parameterized autonomously in each case as detector line collective, con-

tact input, control output, control output and input as acknowledgement with selectable monitoring time

frame.

Technical data

Operating voltage C-NET

DC 12…33 V

External power supply: Input voltage

DC 18…32 V

In-/outputs as collective detector line

GMT Siemens/Cerberus, Synova 300 or similar

Collective line factor (KLK) / end of line

32 / 20 V Transzorb diode

Control output

DC 24 V ±5 % / 2 A (fuse on site)

Contact input

End of line combinations

3,3 kΩ/680 Ω, 2,7 kΩ/560 Ω, 3,3 kΩ

Operating temperature

-25…+60 °C

Storage temperature

-30…+65 °C

Humidity

≤95 % rel.

Communication protocol

C-NET

Connection terminals

0.2…1.5 mm

(Auxiliary terminal 2.5 mm

)

Color housing / cover

white, ~RAL 9010 / transparent mAtt

Protection category EN 60529/IEC 60529

– with auxiliary housing FDCH221

IP30

IP65

System compatibility C-NET

FS720

Standards

CEA GEI I-084, EN 54-17, EN 54-18

Dimensions

132 x 90 x 24 mm

Approvals

VdS G206054, LPCB 531m/03

FDCIO224

Input/output module

Part no.

A5Q00018689

Documents

Product data sheet

007024

FDCIO224

8 Resistors

4 x 2k7; 1 %; 0.35 W

4 x 560 Ω; 1 %; 0.25 W

2 Mounting feet

Technical description

007023

Application

For the VdS interface for extinguishing activating devices.

Addressable applicable.

Function

4 inputs for potential-free contacts.

4 outputs with 4 potential-free relay contacts (AC 230 V / 4 A) for the VdS interface for extinguishing

controls.

Status indication by LED.

Technical data

Communication protocol

C-NET

Operating voltage

DC 12…33 V

Operating current

0,6…0,75 mA

Relay output (ohm)

AC 250 V, 4 A, max. 1000 VA

DC 30 V, 4 A, max. 120 W