User Manual

Special detectors in C-NET
7.2 SWING Radio smoke detector
FDOOT271/FDB271
Neural radio detector
Part no.
S54313-F1-A1
FDB271
Base
Part no.
S54319-F12-A1
Document
Product data sheet
A6V10271323
FDOOT271/FDB271
FDB271
Application
The Swing radio smoke detector can be inserted and removed and actuated using the DZ1191, DZ1193
detector exchanger.
The radio smoke detector consists of the radio smoke detector FDOOT271, the base FDB271 and a
battery pack (S54312-F3-A1).
Function
Uniform response to various types of fires. Dynamic analysis of the sensor signal smoke in the detector
itself. Built-in diagnostic algorithms with automatic self-test. High immunity to false alarms and ambient
influences. High-quality optoelectronic sensor system. Automatic compensation of soiling. Each radio
smoke detector has its own address and can transmit 4 danger levels.
The radio detector is supplied by a 3.6 battery pack and can be mounted at any position within radio
range. In normal operating condition they have a service life of more than 3 years.
Technical data
Supply voltage
3.6 V-10 Ah, battery pack, order separately
Communication protocol
FDnet/C-NET
Transmitter/receiver antenna
Dual band antenna
Transmitting power
≤10 mW ERP
Transmission distance
max. 180 m in building,
max. 1000 m in open air
Channel width
50 kHz
Radio frequency
- 23 channels
- 20 channels
868…870 mHz (SRD Band)
433…435 MHz
Operating temperature
-10…+55 °C
Dimension (ØxH)
117 x 64 mm
Color
white, ~RAL 9010
Protection category
IP44
Humidity
≤95 %
Standard
EN 54-17, EN 54-18, EN 54-25, EN 300220-2
Approval
- VdS
G212104
7.2.1 Accessories for SWING radio smoke detector
FDBZ291
Designation plate
Bestell-Nr.
A5Q00002621
See chapter 2.2.1 for details.
10 pieces
BAT3.6-10
Li-SOCI2 Batteriepack 3,6 V / 10 Ah
Bestell-Nr.
S54370-Z11-A1
See chapter 7.1.1 for details.
50
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014