User Manual

Special detectors in C-NET
7.3 SWING Radio manual call point
FDMH273
Switching unit for FDM273
Part no.
S54323-B108-A1
FDME273
Housing for FDM273
Part no.
S54323-B109-A1
Document
Product data sheet
A6V10271323
FDMH273-R
FDME273
Application
The SWING radio manual call point is used in situations where the user wants to avoid wires and their
installation. In addition it means less interruption of operation and high flexibility for extensions and
changes.
Function
The radio base consists of a housing part inclusive radio electronic and dual band antenna. The radio
base is battery-operated and can be mounted at each place within a radio range. manual call point with
indirect alarm actuation by breaking the glass and pressing the push button. The housing (FDMH273),
the switching unit (FDME273) and the battery pack 3.6 V, 10 Ah need to be ordered separately.
Technical data
Supply voltage
Via detector bus, additionally 3.6 V-10 Ah, battery
pack, monitored
Communication protocol
FDnet/C-NET
Transmitter/receiver antenna
Dual band antenna
Transmitting power
≤10 mW ERP
Transmission distance
max. 180 m in building,
max. 1000 m in open air
Channel width
50 kHz
Radio frequency
- 23 channels
- 20 channels
868…870 mHz (SRD Band)
433…435 MHz
Operating temperature
-10…+55 °C
Dimension (ØxH)
135 x 135 x 58
Color
Red, ~RAL 3000
Protection category
IP44
Humidity
≤95 %
Standard
EN 54-11 Typ B indoor, EN 54-25, EN 300220-2
Approval
- VdS
G213092
51
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014