User Manual

Conventional and collective devices
FDAI93-Ex
Alarm indicator incl. insulating cap
Part no.
S54370-F6-A1
Document
Product data sheet
A6V10276518
Application
Made of transparent plastic, the FDAI93-Ex alarm indicator is suitable for installation in door frames,
switching panels, ceiling voids or special housings. The 22.5 mm Ø mounting hole is drilled by the sys-
tem owner. The holder must be fitted with the insulating cap for safety. For installation in humid rooms
the DCA1191, DJZ1193 housings as well as a washer are available (must be ordered separately). Up to
4 alarm indicators can be built into the housing DCA1191.
Function
Indicator lamp to connect in parallel to automatic fire detectors.
Only one external alarm indicator mAy be connected to each detector.
Technical data
Operating voltage
DC 1,5 V
Operating current, dauernd
max. 20…30 mA
Screwless connection terminals
Wire cross-sectional area max. 1.5 mm
2
Environmental temperature
-25…+80 °C
Ex-classification
'simple apparatus' acc. EN 50020 § 5.4
Ex ib IIC T4 (Ta ≤70 °C)
Humidity
≤95 % rel.
Protection category EN 60529/IEC 60529
– with DJZ1193
– with DCA1191
IP65
IP56
Approvals
EECS, ESTI, PTB
Color
transparent plastic
Dimensions
Ø26 x 51 mm
–
Insulating cap
Part no.
BPZ:3048160001
Application
Use as spare part.
8.10.7.2 Accessories for FDAI93-Ex
DCA1191
Housing with cover
Part no.
BPZ:4588560001
–
Washer
Part no.
BPZ:2473130001
DCA1191
Washer
Application
For surface mounting in humid, wet areas.
Up to 4 alarm indicators FDAI93-Ex can be built into the housing.
Technical data
Housing with cover
Protection category EN 60529/IEC 60529
IP56
Dimensions
135 x 135 x 65 mm
Color
white, ~RAL 9010
Washer
Dimensions
Ø23 x 1 mm
–
Metal screwed cable gland M20 x 1.5
Part no.
A5Q00004478
Details see chapter 2.3.1
90
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014