User Manual

Test equipment and accessories
RE8STCO
Testfire 2001-101 ST test kit
Part no.
S54370-S24-A1
Document
Product data sheet
A6V10397718
Application
The detector tester contains a smoke or a CO capsule. For the performance check, the tester is pushed
over the detector. The smoke / CO released actuates an alarm.
The extension rod FDUM291/292 must be ordered separately.
Kit consists of:
– 1 Testfire 1001-101 tester
– 1 smoke capsule
– 1 CO capsule
– 2 Batteries
– 1 Charger (incl. 12V connection cable)
– 2 mAins cables (110 / 120-220 / AC 240 V)
– 1 USB cable
Forbidden in electrical switching stations or areas where there is a danger of explosion!
Technical data
Operating temperature
5…+45 °C
Storage temperature
-10…+50 °C
Humidity
≤95 %
9.2.2 Accessories for RE7T, RE8ST, RE8STCO
RE7T-A
Solo719 Adaptor for FDUM29x
Part no.
S54370-N4-A1
Application
Adaptor from heat detector tester RE7T to the telescope rods FDUM29x.
95
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014