User Manual

Test equipment and accessories
9.3 Detector base tester DZB1191
DZB1191
Detector base tester
Part no.
BPZ:4680660001
Document
Product data sheet
001049
Application
The DB1191 base tester is handy and simple means of testing the detection line and detector base
connections.
Function
The base tester is inserted in the detector base like a detector. Bases can be tested during installation
either individually or consecutively after installation is completed.
The DBZ1191 can test for open lines, short circuit, earth leakages, polarity and alarm indicator connec-
tion.
9.4 Test equipment for linear smoke detectors
9.4.1 Adjustment device set FDLU291
FDLU291
Adjustment device set for linear smoke detector
Part no.
A5Q00004905
Documents
Product data sheet
007017
Technical description
007016
Application
The optics can be rationally adjusted to the reflector by single-handed alignment by means of the ad-
justment device.
Box with adjustment device, alarm test filter, visor, mAgnet, spiral cable, MC-link cable, and battery 9 V,
0.5 Ah.
Technical data
Dimensions adjustment device
120 x 65 x 22 mm
9.4.2 Detector tester RE10
RE10
Detector tester
Part no.
BPZ:3685190001
Document
Product data sheet
A6V10203222
Application
For performance check of linear smoke detector. In compliance with the type of detector to be tested,
the alarm test filter is inserted in the detector tester.
Alarm test filter contained in FDLU291 or TF04 must be ordered separately.
Function
The detector tester is then held in front of the optical parts of the detector (i.e. into the infrared ray). The
detector reacts after a few seconds.
TF04
Alarm test filter (Absorption 77 %)
Part no.
BPZ:4931090001
Application
Alarm test filter for detector tester RE10.
98
Building Technologies
058_FD720_Equipment_overview_A6V10225323_j_en.doc
CPS Fire Safety 04.2014