Environmental Declaration

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel (2L, AU)

EPD - Type II

Based on ISO 14021

FCA2046-A1 Card cage (1 sector exting.) S54392-B8-A1

Product line

Siemens Schweiz AG

Building Technologies Division

Gubelstrasse 22

6300 Zug - CH

Management System since by

ISO 9001 (Quality) 22.07.1986 SQS

ISO 14001 (Environment) 20.10.1998 SQS

OHSAS 18001 (OH&S) 01.01.2011 SQS

Typical energy consumption 1kWh/a

FS20

Environmental

Product Declaration

Type of equipment /

Product No.

Product

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal

during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Maintenance

Fire load 4MJ

20-PAP Corrugated fiber board Die-Cut box 142g

Aluminum, Polyester, Polyethylene Shielding bag 22g

4-LDPE PE-bags 6g

22-PAP Papier Mounting instruction 3g

Expanded plastic Foam 42g

Notes on disposal

Total weight of device 418g

The total weight of a device may deviate from the total of the weights of all individual components due to rounding.

PA Cable joint 7g

PC Card guide 13g

Steel; zinc plated Screws 8g

Steel; zinc plated Mounting plate for cables 142g

PA 66, CuZn, CuSn, CrNi PCB-Connector 12P 5.08MM 26g

PA 66, CuZn, CuSn, CrNi PCB-Connector 8P 5.08MM 18g

PA 66, CuZn, CuSn, CrNi PCB-Connector 8P 3.81MM 6g

PA 66, CuZn, CuSn, CrNi 2x PCB-Connector 4P 3.81MM (2pcs.) 7g

PA 66, CuZn, CuSn, CrNi 2x PCB-Connector 6P 3.81MM (2pcs.) 10g

Electronic components Resistors 15g

FR4; TBBA; solder SnAgCu PCBA to FCA2046-A1 166g

One-way, recyclable

Not necessary

Metals

Plastics

Materials

Packaging

The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must

not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding

disposal, use the systems setup for collecting electronic waste.

Observe all local and applicable laws.

Disposal

PCBAs (Printed Circuit Board

assembled)

Page 1/2

Summary of content (2 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Process control Type of equipment / Product No. FCA2046-A1 Card cage (1 sector exting.) Product line FS20 S54392-B8-A1 Siemens Schweiz AG Building Technologies Division Gubelstrasse 22 6300 Zug - CH Management System since by ISO 9001 (Quality) 22.07.1986 SQS ISO 14001 (Environment) 20.10.1998 SQS OHSAS 18001 (OH&S) 01.01.
PAGE 2
EPD - Type II Based on ISO 14021 Comments EU-directive 2011/65/EU (RoHS) The device does not contain substances in concentrations and applications banned under the EU RoHS Directive. Regulation (EC) No. 1907/2006 (REACH) To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No.