User Manual

Getting started
Explanation of the symbols
2
14 | 47
A6V12237004_enUS_b
5
Incident list
Displays all site incidents in a list. Color bars display the corresponding event
category.
6
Incident details
Displays detailed information on the selected incident. The specific incident must be
selected.
7
Category filter
The incident list is filtered by the selected category. Multiple selection is possible.
The category filter may have a different number of categories depending on the
applicable standard (EN, UL, ULC).
8
Incident legend
Information on symbols in the incident list.
2.2 Explanation of the symbols
Symbol description in map or list view
The Connect X300 Gateway is incorrectly configured. Connection is not
possible. See the detailed explanation provided after the table.
Connect X300 Gateway is connected to the cloud.
Connect X300 Gateway is not connected to the cloud. Connection is not
possible. Notify local Siemens Support.
The site is not assigned.
Displays a pending alarm.
Displays multiple sites that are operational.
Displays an overview of an area with at least one pending alarm. The
number of alarms is displayed in tooltip.
Displays an overview of an area with at least one pending incident. The
number of incidents is displayed in tooltip.
Displays an overview of an area with at least one pending alarm and one
area with no alarms. The number of alarms is displayed in tooltip.
Displays an overview of an area with at least one pending alarm and
incident. The number of alarms and incidents is displayed in tooltip.
Displays an operational site.
Displays a site with at least one pending alarm.
Displays a site with at least one pending incident.
Displays a disconnected site.