User Manual

Getting started
Topology
2
A6V12237004_enUS_b
15 | 47
The Connect X300 Gateway is incorrectly configured
A new site is created in Asset Manager and a Connect X300 Gateway device is
added. The icon is then displayed , since the required configuration is not yet
completed:
for distribution (see Document Commissioning Connect X300 Gateway,
section Assign distribution);
for Site-ID (see document Commissioning Connect X300 Gateway, section
Connect fire detection system to Portal).
Select to open the edit page. The icon disappears as soon as the values
are added and saved for distribution and Site-ID.
2.3 Topology
2.4 Safety notes
This section is extracted from the Cybersecurity Policy. More detailed information on
Cybersecurity is available in the document A6V12160702 Cybersecurity policy.