User Manual
Table Of Contents
Connect tunnel
Disconnect tunnel connection
9
A6V12237004_enUS_b
41 | 47
Check whether you are connected to the Siemens Internetwork if the connection is
not established within 10 seconds.
9.2 Disconnect tunnel connection
The tunnel connection is connected.
◈
On the right side, select 'Disconnect'.
NOTICE
Avoid connection problems
Only use the 'Disconnect' button to disconnect the
Cerberus Portal from the panel.
Reason: Using 'Disconnect' or 'Log out' from the Siemens 'Cloud devices' window
results in an unstable connection to the Cloud.
9.3 Check tunnel connection
NOTICE
Avoid connection problems
Use the 'Cloud device' for information only and not to 'Connect' or 'Disconnect' / 'Log
out'.
1. Connect a Tunnel connection [➙ 40] using the Cerberus Portal.
2. In the status bar, double the 'Cloud devices' symbol.