Operating Instructions
Table Of Contents
- Fire Alarm Control Panel
- Model FC901
- TABLE OF CONTENTS
- INTRODUCTION
- DESCRIPTIONS
- SLC grounding detection threshold
- CONTROL PANEL OPERATION
- CONTROL PANEL INSTALLATION
- SYSTEM WIRING
- AC Connection
- Battery Connection
- WIRING
- Control Panel Wiring Overview
- Wiring Entering Enclosure
- Install Wiring
- Wiring Separation
- Internal Structure
- Power Supply and Battery Wiring
- Status Relays
- Auxiliary Power Outputs Wiring
- NAC Wiring
- Serial Interface Circuit (UFP)
- Serial Remote Device Wiring Overview
- SLC Addressable Device Circuit
- SLC Addressable Device Wiring Diagrams
- Optional City Tie/Leased Line
- DACT Wiring
- PROGRAMMING THE CONTROL PANEL
- MAINTENANCE
- APPENDIX-A: REFERENCE DATA
- APPENDIX-B: COMPATIBLE DEVICES
- APPENDIX-C: TROUBLESHOOTING
- APPENDIX-D: ALARM VERIFICATION
- APPENDIX-E: APPLICATION SPECIFIC DETECTION
- APPENDIX-F: TESTING/MAINTENANCE
- APPENDIX-G: LCD, CONTROLS AND INDICATORS
- APPENDIX-H: OUTPUT FEATURES
- APPENDIX-I: PAS / PRE-SIGNAL
- APPENDIX-J: DACT INFORMATION OVERVIEW
- APPENDIX-K: DRIFT COMPENSATION
- APPENDIX-L: RELEASING OPERATION
- APPENDIX-M: GLOSSARY
- APPENDIX-N: PAD-4 WIRING INSTRUCTION
- APPENDIX-O: ISOLATOR SUPPORT
17
DACT Circuits
Power limited
Supervised for short or open circuit conditions
Compliance to FCC part 68
Support RJ31X connection
Compatible Digital Alarm Communication Receiver (DACR) list
Manufacturer
Model Number
Communication
Technology
Installation
Part Number
For installation
in
Telguard
TG-7FS
GSM
56044102
US
DMP
ICOMSLF
IP
-
US
NAPCO Starlink
SLE-LTEVI-FIRE
IP/GSM
-
US
NAPCO Starlink
SLE-LTEVI-CFB
IP/GSM
-
US
NAPCO Starlink
SLE-LTEVI-CFBPS
IP/GSM
-
US
NAPCO Starlink
SLE-LTEAI-CFBPS
IP/GSM
-
US
NAPCO Starlink
SLE-LTEAI-CFB
IP/GSM
-
US
NAPCO Starlink
SLE-LTEAI-FIRE
IP/GSM
-
US
B465
Bosch
IP/GSM
-
US
DSC
TL300CF
IP
29007636/29007842
Canada
DSC
LE4010CF
GSM
-
Canada
CAUTION:
- To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line
cord.
- Only to a loop start telephone circuit and not to a ground start telephone circuit.
- To verify the integrity of the call forwarding feature every 24 hours.