Operating Instructions

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel (2L, AU)

Table Of Contents

Fire Alarm Control Panel
Model FC901
TABLE OF CONTENTS
INTRODUCTION
- CONTROL PANEL LIMITATIONS
- PREFACE
- FCC Part 68 WArning
- INDUSTRY CANADA STATEMENT
- SERVICE REQUIREMENTS
DESCRIPTIONS
- FC901 SYSTEM DESCRIPTION
- OPTIONAL MODULES
- AUXILIARY MODULES
- SLC ADDRESSABLE DEVICES
- EVENT HISTORY
- GENERAL DESIGN FEATURES
SLC grounding detection threshold
- NAC Operation
- Security Features
- REGULATORY STANDARDS
- GENERAL SPECIFICATIONS
CONTROL PANEL OPERATION
- OPERATION INSTRUCTIONS
- ADDITIONAL OPERATING PROCEDURES
  - Lamp Test
  - History
- FC901 OPERATING INSTRUCTIONS
- FSD901 OPERATING INSTRUCTIONS
CONTROL PANEL INSTALLATION
- PARTS SUPPLIED – FC901
- CAUTIONS
- CONTROL PANEL LOCATION
- INSTALLATION
SYSTEM WIRING
- AC Connection
- Battery Connection
- WIRING
PROGRAMMING THE CONTROL PANEL
- KEYPAD PROGRAMMING
- PC PROGRAMMING
- PROGRAMMING SECURITY
MAINTENANCE
- GENERAL
- QUICK TEST
APPENDIX-A: REFERENCE DATA
- WIRE SELECTION GUIDES
  - Resistance of Solid Copper Wire
  - Addressable Device Circuit Wire Selection Guide
- BATTERY SIZE CALCULATIONS
APPENDIX-B: COMPATIBLE DEVICES
- DEVICES FOR ADDRESSABLE DEVICE CIRCUITS
- UFP devices
APPENDIX-C: TROUBLESHOOTING
- A. General
- B. System Events
APPENDIX-D: ALARM VERIFICATION
APPENDIX-E: APPLICATION SPECIFIC DETECTION
APPENDIX-F: TESTING/MAINTENANCE
APPENDIX-G: LCD, CONTROLS AND INDICATORS
- Panel in US
- Panel in Canada
- Communication Port Connector
- LEDS, Buzzer and Dedicated Push Buttons
- LCD Display
APPENDIX-H: OUTPUT FEATURES
- Output Activation- and Deactivation- Delays
APPENDIX-I: PAS / PRE-SIGNAL
- PAS
- Pre-Signal
APPENDIX-J: DACT INFORMATION OVERVIEW
- DACT Compatible Alarm Communicators
- Wiring Diagram for DSC’s TL300CF and LE4010CF Connection, Including Trouble Reporting RoutE
APPENDIX-K: DRIFT COMPENSATION
APPENDIX-L: RELEASING OPERATION
APPENDIX-M: GLOSSARY
APPENDIX-N: PAD-4 WIRING INSTRUCTION
APPENDIX-O: ISOLATOR SUPPORT

Power Supply FP2011-U1 Mounting

Secure the power supply to the back of enclosure using the four provided #8-32 x 3/8 screws.

AC Input terminals must be located at the right side of the enclosure.