Operating Instructions

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel (2L, AU)

Table Of Contents

Fire Alarm Control Panel
Model FC901
TABLE OF CONTENTS
INTRODUCTION
- CONTROL PANEL LIMITATIONS
- PREFACE
- FCC Part 68 WArning
- INDUSTRY CANADA STATEMENT
- SERVICE REQUIREMENTS
DESCRIPTIONS
- FC901 SYSTEM DESCRIPTION
- OPTIONAL MODULES
- AUXILIARY MODULES
- SLC ADDRESSABLE DEVICES
- EVENT HISTORY
- GENERAL DESIGN FEATURES
SLC grounding detection threshold
- NAC Operation
- Security Features
- REGULATORY STANDARDS
- GENERAL SPECIFICATIONS
CONTROL PANEL OPERATION
- OPERATION INSTRUCTIONS
- ADDITIONAL OPERATING PROCEDURES
  - Lamp Test
  - History
- FC901 OPERATING INSTRUCTIONS
- FSD901 OPERATING INSTRUCTIONS
CONTROL PANEL INSTALLATION
- PARTS SUPPLIED – FC901
- CAUTIONS
- CONTROL PANEL LOCATION
- INSTALLATION
SYSTEM WIRING
- AC Connection
- Battery Connection
- WIRING
PROGRAMMING THE CONTROL PANEL
- KEYPAD PROGRAMMING
- PC PROGRAMMING
- PROGRAMMING SECURITY
MAINTENANCE
- GENERAL
- QUICK TEST
APPENDIX-A: REFERENCE DATA
- WIRE SELECTION GUIDES
  - Resistance of Solid Copper Wire
  - Addressable Device Circuit Wire Selection Guide
- BATTERY SIZE CALCULATIONS
APPENDIX-B: COMPATIBLE DEVICES
- DEVICES FOR ADDRESSABLE DEVICE CIRCUITS
- UFP devices
APPENDIX-C: TROUBLESHOOTING
- A. General
- B. System Events
APPENDIX-D: ALARM VERIFICATION
APPENDIX-E: APPLICATION SPECIFIC DETECTION
APPENDIX-F: TESTING/MAINTENANCE
APPENDIX-G: LCD, CONTROLS AND INDICATORS
- Panel in US
- Panel in Canada
- Communication Port Connector
- LEDS, Buzzer and Dedicated Push Buttons
- LCD Display
APPENDIX-H: OUTPUT FEATURES
- Output Activation- and Deactivation- Delays
APPENDIX-I: PAS / PRE-SIGNAL
- PAS
- Pre-Signal
APPENDIX-J: DACT INFORMATION OVERVIEW
- DACT Compatible Alarm Communicators
- Wiring Diagram for DSC’s TL300CF and LE4010CF Connection, Including Trouble Reporting RoutE
APPENDIX-K: DRIFT COMPENSATION
APPENDIX-L: RELEASING OPERATION
APPENDIX-M: GLOSSARY
APPENDIX-N: PAD-4 WIRING INSTRUCTION
APPENDIX-O: ISOLATOR SUPPORT

Ground Wire Installation

Install one end of the grounding cable on the enclosure back box.

Install the other end of the grounding cable on the enclosure outer door.

Enclosure back box

Enclosure outer door