Operating Instructions

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFire control panel (2L, AU)

Table Of Contents

Fire Alarm Control Panel
Model FC901
TABLE OF CONTENTS
INTRODUCTION
- CONTROL PANEL LIMITATIONS
- PREFACE
- FCC Part 68 WArning
- INDUSTRY CANADA STATEMENT
- SERVICE REQUIREMENTS
DESCRIPTIONS
- FC901 SYSTEM DESCRIPTION
- OPTIONAL MODULES
- AUXILIARY MODULES
- SLC ADDRESSABLE DEVICES
- EVENT HISTORY
- GENERAL DESIGN FEATURES
SLC grounding detection threshold
- NAC Operation
- Security Features
- REGULATORY STANDARDS
- GENERAL SPECIFICATIONS
CONTROL PANEL OPERATION
- OPERATION INSTRUCTIONS
- ADDITIONAL OPERATING PROCEDURES
  - Lamp Test
  - History
- FC901 OPERATING INSTRUCTIONS
- FSD901 OPERATING INSTRUCTIONS
CONTROL PANEL INSTALLATION
- PARTS SUPPLIED – FC901
- CAUTIONS
- CONTROL PANEL LOCATION
- INSTALLATION
SYSTEM WIRING
- AC Connection
- Battery Connection
- WIRING
PROGRAMMING THE CONTROL PANEL
- KEYPAD PROGRAMMING
- PC PROGRAMMING
- PROGRAMMING SECURITY
MAINTENANCE
- GENERAL
- QUICK TEST
APPENDIX-A: REFERENCE DATA
- WIRE SELECTION GUIDES
  - Resistance of Solid Copper Wire
  - Addressable Device Circuit Wire Selection Guide
- BATTERY SIZE CALCULATIONS
APPENDIX-B: COMPATIBLE DEVICES
- DEVICES FOR ADDRESSABLE DEVICE CIRCUITS
- UFP devices
APPENDIX-C: TROUBLESHOOTING
- A. General
- B. System Events
APPENDIX-D: ALARM VERIFICATION
APPENDIX-E: APPLICATION SPECIFIC DETECTION
APPENDIX-F: TESTING/MAINTENANCE
APPENDIX-G: LCD, CONTROLS AND INDICATORS
- Panel in US
- Panel in Canada
- Communication Port Connector
- LEDS, Buzzer and Dedicated Push Buttons
- LCD Display
APPENDIX-H: OUTPUT FEATURES
- Output Activation- and Deactivation- Delays
APPENDIX-I: PAS / PRE-SIGNAL
- PAS
- Pre-Signal
APPENDIX-J: DACT INFORMATION OVERVIEW
- DACT Compatible Alarm Communicators
- Wiring Diagram for DSC’s TL300CF and LE4010CF Connection, Including Trouble Reporting RoutE
APPENDIX-K: DRIFT COMPENSATION
APPENDIX-L: RELEASING OPERATION
APPENDIX-M: GLOSSARY
APPENDIX-N: PAD-4 WIRING INSTRUCTION
APPENDIX-O: ISOLATOR SUPPORT

B. System Events

ENTRY

INDICATES/NOTES

Reset

Panel reset

Silence

Silence all silenceable outputs

Unsilence

Unsilence all silenced outputs

Test

Start quick test

QuitTest

Exit quick test

Acknowledge

Panel events acknowledged

Unacknowledge

Resound of the trouble/supervisory

User level login

LogOut

User level logout

DACT Bypass

The configured DACT module stops working

Addressable Device Bypass

The input and output channel for configure P2 point stops working

NAC Bypass

The configured NAC stops working

Fire Drill

The system is performing a fire drill

Manual Evac

Manual fire alarm

CO Test

Corresponding detector’s CO channel is set to be the most sensitive

Lamp Test

Start a lamp test

ClearHistory

Delete all history records

PreDischarge

Panel in predischarge phase

PreDischarge Timeout

Predischarge phase finished