User Manual

16
Smart Infrastructure
CE2N5372en
2020-08-18
To fit the processor unit to the wall, remove it from the flow measuring section and screw the
adapter plate to the wall and slide the processor unit to the adapter base, snapping into
place.
NOTICE
WS.5..: The adapter plate cannot be removed. The wall adapter must be ordered
separately as an accessory.
WS.6..: The adapter plate can be removed from the flow measuring section.
Wall mounting Wall adapter (view from above)
Wall adapter (side view)
Maximal screw head height
(if using the wall bracket)
Maintenance
The meters are maintenance-free.
Observe all national calibration regulations.