GB CCTV Colour Monitors User’s Manual CMCC1020 CMCC1420 CMCC1725 CMCC2120 Fire & Security Products Siemens Building Technologies
Data and design subject to change without notice. / Supply subject to availability. © Copyright by Siemens Building Technologies AG We reserve all rights in this document and in the subject thereof.
GB Contents 1 1.1 1.2 2 3 4 4.1 4.2 4.3 4.4 4.5 4.5.1 4.5.2 5 6 Important Safeguards............................................................................. 18 Product Safety and Electromagnetic Compatibility (EMC).............................. 18 Manufacturer’s Conformity Declaration ....................................................... 18 FCC Information..................................................................................... 19 Safety Precautions.......................................
1 Important Safeguards 1.2 Product Safety and Electromagnetic Compatibility (EMC) This product is designed for use in general CCTV applications in living, business or industrial environments. Please contact the supplier of this device before using it in medicinal and/or intrinsically-safe applications or in an industrial EMC environment. The product must be installed according to the currently valid installation regulations for EMC to guarantee the designed use and to prevent EMC problems. 1.
GB 2 FCC Information This equipment has been tested and found to comply with the limits for a class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
3 Safety Precautions 1 2 Operate this unit only from the type of power source indicated on the label. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet. 3 Do not place this monitor near a radiator or heating vent. 4 Do not push objects of any kind through cabinet openings. This may result in fire or electrical shoc k. 5 Before adding attachments always ask a service technician to perform routine safety tests to determine that equipment is in safe operating condition.
GB 4 • • • • General Features Compatible with: PAL / NTSC System Scanning System: NTSC 15750 / 60 Hz or PAL 15625 / 625 Lines, 50 Hz Video Input Signal: CVBS Input Power: 100 to 240 V AC 21 Siemens Building Technologies Fire & Security Products 19.05.
4.
GB 4.
4.
GB 4.
4.5 Connections and Controls 4.5.1 Connections Power Input Connect the supplied AC power cord to the AC input connector. ENSURE THAT THE SYSTEM IS EARTHED! Ensure all connections are completed before applying power to the monitor. Video Input and Loop-through Terminals Input terminals and loop-through terminals are for the input and loop through of one composite video signal. The monitor IMPEDANCE SWITCH must be switched to Hi-Z when a 75 O terminated device is connected to the output. 4.5.
GB 5 1 2 3 4 5 6 7 8 6 Operating Instructions Place the monitor on a flat and firm surface (see Safety Precaut ions on page 20). This monitor can be operated between 100 to 240 V AC. Plug the power cord into AC outlet on the wall. Link the A/V terminal from your devices into the audio/video in RC A/BNC connectors of the monitor. Turn your device system power switch ON. then turn the monitor power switch ON. The power indicator will be ON at this moment.
28 Siemens Building Technologies Fire & Security Products 19.05.