Access Control Products & Accessories Catalogue 2011–2012 Answers for infrastructure.
Siemens: one brand, one partner – one system ...
Table of Contents Introduction .......................................................................................................................... I-1 SiPass System Overview .................................................................................................... I-6 Single Door Products ............................................................................................................ 1-1 Diagrams ..................................................................................
J1BTT q UIF JEFBM DIPJDF GPS FWFSZ BQQMJDBUJPO 4J1BTT BDDFTT DPOUSPM QSPEVDUT BOE TZTUFNT QSPWJEF TFDVSJUZ UP B XJEF WBSJFUZ PG EJGGFSFOU LJOET PG PSHBOJ[BUJPOT BSPVOE UIF XPSME q MBSHF NFEJVN TJ[FE BOE TNBMM 8IFSFWFS UIFZ BSF JOTUBMMFE PVS QSPEVDUT BOE TZTUFNT FOTVSF UIBU UIF SJHIU QFPQMF BMXBZT IBWF BDDFTT UP UIF SJHIU QMBDFT BU UIF SJHIU UJNFT BOE UIBU UIF XSPOH QFPQMF OFWFS EP 8IJMF TFDVSJUZ JT PG VUNPTU JNQPSUBODF UIF 4J1BTT SBOHF IBT BMTP CFFO EFTJHOFE UP QSPWJEF B IJHI MFWFM PG DPOWFOJF
8IZ JT BO BDDFTT DPOUSPM TZTUFN B CFUUFS PQUJPO UIBO USBEJUJPOBM MPDLT BOE LFZT "TJEF GSPN UIF QSPCMFN PG LFZT PGUFO HFUUJOH MPTU BOE MPDLT CFJOH FYQFOTJWF UP SFQMBDF UIF NBKPS ESBXCBDL PG LFZT GSPN B TFDVSJUZ QFSTQFDUJWF JT UIBU QFPQMF XIP IBWF UIF LFZT UP B GBDJMJUZ IBWF VOMJNJUFE BDDFTT BOE UIFJS DPNJOHT BOE HPJOHT DBOOPU CF USBDLFE "O BDDFTT DPOUSPM TZTUFN PO UIF PUIFS IBOE QSPWJEFT B CVJMEJOHmT PXOFS PQFSBUPS XJUI UIF BCJMJUZ UP SFTUSJDU BDDFTT UP IJT GBDJMJUJFT UP DFSUBJO UJNFT PG UIF XFFL P
SiPass system overview SiPass integrated SiPass Entro Infopoint 812 Infopoint 812 CR1 SiPass Single Door Products
Identity management SPC or Sintony control panel AC5102 Granta Security Controller AR6182-MX AR6181-MX System Visitor Administration Management AR6182-MX AR6182-MX arming/disarming AR6181-MX AR6181-MX inside elevator AR6182-MX 4101-3 AR6181-MX HF100 4101-3 ATI5100 4101-3 4101-3 Intrusion arming terminal ? 1 4 7 2 3 5 6 8 9 1 PR100 HF100 PR100
Security has never been simpler
SiPass Single Door Products Robust, reliable and cost-efficient devices for individual doors SiPass® Single Door Products are robust, reliable and cost-efficient. The main benefit of installing them is that they eliminate the challenge of managing keys and the cost of replacing locks when a key gets lost. They are also very convenient from a user’s perspective.
Single Door Products Diagrams K42 BC615 PSU PSU Exit button Exit button Electric lock Door contact Electric lock Alarm output Printer DC800 SiPass Bewacom PSU Exit button Electric lock Door contact Alarm output CCTV PSU Readers Exit button Electric lock 1-2 © Siemens Switzerland Ltd 2011
1 Single Door Products Codoor Type CD4000 Order No. Codoor codelock D European lock case standard S24246-C8101-A1 CD4000 is a battery-powered codelock that fits directly on an interior door. The programming of codes is carried out directly via the keypad. It is possible to manually change the settings to leave the door unlocked if necessary. The batteries used are standard alkaline or lithium cells.
Single Door Products Codoor Type RF30-EM Order No. Wireless Codoor D Scandinavian lock case standard S54501-F2-A1 RF30-EM is a Codoor unit that can be used either as a standalone product or as a wireless component in a SiPass Entro system. It contains a reader‚ keypad‚ controller‚ lock mechanism and power supply‚ all in a single housing. It is designed to be mounted directly on an interior door. In standalone mode it is possible to store up to 250 cards and do administration using the built-in keypad.
1 Single Door Products Codelocks Type K42 Order No. S24246-C3552-A1 Codelock with two codes The K42 is the best-selling codelock in the world. It is compact and easy to use with a modern design that is suitable for either indoor or outdoor mounting. The K42 has a capacity of two four-digit codes. One can be used by residents while the other is used by the property caretaker‚ for example. All settings are made directly in the unit.
Single Door Products Codelocks Type K44 Duo Order No. S24246-C3553-A1 Codelock with 30 codes The K44 Duo is a programmable codelock for one or two doors. It is possible to set separate codes for each door or the same code for both. K44 Duo also provides the option of door control and alarm output. All programming is done via the keypad. The K44 Duo has a code capacity of 20 four-digit codes and 10 six-digit codes.
1 Single Door Products Compact Card Readers Type BC615 Order No. S24246-F3600-A1 Magnetic stripe card reader BC615 is a compact magnetic stripe card reader for one door that is programmable from the keypad. It can also be used as part of a SiPass Entro system in conjunction with CR1. It can be mounted either indoors or outdoors and it has a built-in calender clock to make it easy to change security levels. Access registration and printing are possible. The keypad has background illumination.
Single Door Products Compact Card Readers Type BC615-.. Order No. BC615-.. Proximity card readers These compact proximity card readers work using Cotag or EM4102 reading technology. They are programmable from the keypad and are intended for use on single doors. They can also be used as part of a SiPass Entro system in conjunction with CR1. The built-in calender clock makes it easy to change security levels. Access registration and printing are possible. The keypad has background illumination.
1 Single Door Products Controllers Type DC800 Order No. S24246-C8200-A1 Door controller The DC800 is a powerful and highly secure door controller that can manage access rights for up to 1‚000 cardholders. It offers a range of different reader options D card only‚ group code only‚ or card plus personal code. It can be connected to readers on both sides of the door to control both entries and exits.
Single Door Products Kits Type AK1110-CO Order No. DC800 / PR500-Cotag Door Kit S54507-S6-A1 DC800 / PR500-Cotag Door Kit includes: V One DC800 door controller V One PR500-Cotag proximity reader Note: Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.
1 Single Door Products SiPass Bewacom Type BM3 Order No. S24246-C7900-A1 Door entry phone for PABX BM3 is a smart and cost-efficient Bewacom door entry phone that connects to a company’s existing PABX internal telephone system in just the same way as any other extension in that system. The BM3 makes it possible to unlock the main entrance door‚ for example‚ via the press of a button at any of the telephone extensions that are connected to the company’s internal telephone system.
Single Door Products SiPass Bewacom Type BM31 Order No. Single button door entry phone for PABX S24246-C7901-A1 BM31 is a smart and cost-efficient Bewacom door entry phone that connects to a company’s existing PABX internal telephone system in just the same way as any other extension in that system. Since the BM31 makes use of the “hotline” function in PABX systems‚ it only has one call button to allow calls to a single extension (usually reception‚ but it can be set to any number in the PABX system).
SiPass Bewacom – Robust and reliable door entry phones.
Open the door to comprehensive security
SiPass Entro Comprehensive access control SiPass Entro is a very scalable, flexible, and user-friendly access control system that can monitor and control access to facilities with up to 512 doors and 40,000 cardholders. It enables customized access rights by categories and offers a complete range of reports. System configuration is simple and an extensive range of reader and card options are available.
SiPass Entro Diagrams Local PC for administration Security Controller Reservation Management System Controller Visitor Management RS232 InfoPoint 812 PC for administration WAN/LAN SISTORE DVR System Administration SR35i InfoPoint 812 Camera Camera SR35i SR35i SISTORE RS485 Camera Camera Reservation Management PR500 PR500 DC12 PP500 PP500 DC22 Alarm IOR6 2-2 Control inputs and outputs © Siemens Switzerland Ltd 2011
SiPass Entro Core Software 2 Type SiPass Entro Order No. SiPass Entro SiPass Entro software The SiPass Entro software is Windows-based and very easy to use. It can communicate with system hardware via direct connection (COM)‚ local and global networks (LAN/WAN)‚ TCP/IP or modem. The software supports various operating authorizations D for example‚ reception personnel may be authorized only to handle card activation while administrators are authorized to implement basic modifications of the system.
SiPass Entro Core Software Type Entro SW SE Order No. SiPass Entro software D Standard edition S24246-P8601-A1 See SiPass Entro for technical overview and note the additional / other specifications: This CD-ROM contains the Standard edition of the SiPass Entro software‚ one user license and both the installer and end-user documentation. It is for usage in Windows 7‚ Windows Vista‚ Windows XP or Windows 2000 environments.
SiPass Entro Controller 2 Type SR35i.. Order No. Segment controller with wireless capability SR35i.. The segment controller is the heart of the SiPass Entro system. It processes all the information in the system and stores the complete database. As a result‚ the system is robust‚ easy to maintain and able to operate without a connected PC or server‚ even when SISTORE DVRs are connected to it.
SiPass Entro Controller Type Order No.
SiPass Entro Door Modules 2 Type DC01 Order No. Door controller for use without reader S24246-C8500-A1 The DC01 is designed to monitor and control one door in a SiPass Entro system. When it is connected to a door it continuously reports the status of that door (open or closed) to the system‚ which increases the level of security in the building. The DC01 cannot be connected to a reader.
SiPass Entro Door Modules Type DC12 Order No. Door controller for use with reader(s) S24246-C8502-A1 The DC12 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC12 can support two readers and thereby control both entries and exits to a restricted area (anti-passback). The DC12 includes an integrated status display window to simplify installation and service.
SiPass Entro Door Modules 2 Type DC22 Order No. Door controller with alarm control functions S24246-C8503-A1 The DC22 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC22 can support two readers and thereby control both entries and exits to a restricted area (anti-passback). The DC22 includes an integrated status display window to simplify installation and service.
SiPass Entro Door Modules Type RF30-EM Order No. Wireless Codoor D Scandinavian lock case standard S54501-F2-A1 RF30-EM is a Codoor unit that can be used either as a standalone product or as a wireless component in a SiPass Entro system. It contains a reader‚ keypad‚ controller‚ lock mechanism and power supply‚ all in a single housing. It is designed to be mounted directly on an interior door. In standalone mode it is possible to store up to 250 cards and do administration using the built-in keypad.
SiPass Entro Door Modules 2 Type RF9 Order No. S54505-B1-A1 Wireless router RF9 extends the radio link between the SR35i and the RF30-EM. It also acts as a tool for measuring radio coverage. It includes three LEDs to indicate signal strength and communication quality. Battery Operating voltage Current consumption Frequency band Indicators Operating temperature Environment IP rating Colour Dimensions (Ø x H) Weight Approval © Siemens Switzerland Ltd 2011 For test purposes 9 V.
SiPass Entro Signal Modules Type IOR6 Order No. S24246-C8501-A1 IO relay central IOR6 is a general relay central designed for use with SiPass Entro and SiPass integrated. Its four inputs and six outputs can be used for applications such as common alarm outputs‚ fire alarm inputs‚ elevator control‚ machine control or door control (in reservation applications). IOR6 can also be used for timer functions.
SiPass Entro Terminals 2 Type IP812.. Order No. IP812.. InfoPoint InfoPoint is used as a reservation terminal for SiPass Entro and has an integrated function to send and receive information from/to the segment controller (acting as a web server). The InfoPoint uses TCP/IP and works similarly to a web browser in a PC. The terminal includes a color screen and keys for navigating. InfoPoint also has a proximity reader to identify the person who wants to use the unit (either Cotag‚ or EM reading technology).
SiPass Entro Kits Type AK2100-CO Order No. SiPass Entro PR500-Cotag Starter Kit for two doors S54507-S12-A1 The SiPass Entro PR500-Cotag Starter Kit includes everything you need to set up a two-door access control system. This kit can easily be complemented with one or more door kits to create a larger access control system. Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.
SiPass Entro Kits 2 Type AK2110-CO Order No. SiPass Entro PR500-Cotag Door Kit S54507-S4-A1 SiPass Entro PR500-Cotag Door Kit includes: V One DC12 door controller V One PR500-Cotag proximity reader Note: Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.
SiPass Entro Kits Type AK2114-CO Order No. SiPass Entro HF500-Cotag Door Kit S54507-S24-A1 SiPass Entro HF500-Cotag Door Kit includes: V One DC12 door controller V One HF500-Cotag hands-free reader Note: Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.
SiPass Entro Kits 2 Type AK2110-EM Order No.
SiPass Entro Kits Type AK2110-MG Order No.
Open the door to comprehensive security... install SiPass Entro! Answers for infrastructure. SiPass Entro is a very scalable, flexible, and user-friendly access control system that can monitor and control access to facilities with up to 512 doors and 40,000 cardholders. It enables customized access rights by categories and offers a complete range of reports. System configuration is simple and an extensive range of reader and card options are available.
Security systems you can count on
Granta Security & freedom in perfect harmony Granta is a modular access control and security management system that supports sites that range in size from as few as four doors to up to 4,096 doors and 100,000 cardholders. Regardless of system size, it provides round-the-clock protection, enabling you to control the movement of personnel and vehicles, manage visitor access, control and monitor CCTV systems, protect staff and assets, and even remotely administer and secure sister sites around the world.
Granta Diagrams Security Controller System Administration Visitor Management 4101-3 HF100 4101-3 4101-3 4101-3 PR100 3-2 HF100 PR100 © Siemens Switzerland Ltd 2011
Granta Core Software Type 4890 Order No. Granta core software package 3 GBI: 50-570 Granta core software provides a comprehensive suite of security management tools based on the industry standard Microsoft SQL database. The software is available in multiple languages and is fully password protected to allow the system to be used by operators with many different privilege levels‚ set according to their function and seniority.
Granta Core Software Type 4891 Order No. Granta Multi System Manager GBI: 50-571 Granta Multi System Manager provides a centralised database for easy IT support‚ centralised services including monitoring and reporting‚ as well as management for alarms‚ users and visitors. Granta MSM connects as a central control workstation to each of the client systems simultaneously‚ which minimises workload across the whole system. Granta MSM can connect and manage up to 32 client Granta systems.
Granta Software Extensions Type 4881 Order No. Alarm graphics module 3 GBI: 50-521 The alarm graphics module provides graphical control and representation of alarm events. It’s easy to design graphical site plans that are then used to identify and process system alarm events. In the case of an alarm‚ the software provide both an audible warning and a visual indication of where the alarm is occurring so that the operator can immediately take action.
Granta Software Extensions Type 4889 Order No. Database partitioning module GBI: 50-519 The database partitioning module controls the separation of data for use by different companies on the same system‚ which makes it ideal for multi-tenanted buildings. Partitions can be grouped together to provide higher levels of administrative control.
Granta Controllers Type 4101-3 Order No. 3 GBI: 50-560 Modular controller (MK3) The 4101-3 can control up to eight reading heads or readers‚ TCP/IP‚ RF module‚ memory expansions and comms module are all available "onboard" rather than as separate add-ons. The integrated Cotag technology enables the most cost-effective hands-free solution on the market‚ with a proximity reading range of up to 40 cm and a hands-free reading range of up to 100 cm.
Granta Reading heads Type HF100-Cotag Order No. GBI: 21-406 Hands-free reading head The HF100-Cotag is a hands-free Cotag reading head that provides a reading range of up to 100 cm. It is the ideal choice for doors with very high throughput‚ doors intended for disabled access‚ parking barriers and doors in warehouses.
Granta Reading heads Type 0270 Order No. 3 GBI: 21-408 Loop coupler The 0270 loop coupler is a simple wire loop that uses Cotag hands-free technology to provide a reading range of up to 200 cm when used together with Cotag “active” cards and tags. It is the ideal choice for healthcare facilities and asset management.
Granta Reading heads Type PM100-Cotag Order No. Panel-mounted proximity reading head GBI: 50-511 The PM100-Cotag is a panel-mounted proximity reading head that fits into third-party enclosures such as door-entry phones‚ barriers and turnstiles. It has a reading range of up to 28 cm.
Granta Signal Modules Type 4253 Order No. 3 GBI: 50-127 Input/output module The 4253 input/output module provides 16 inputs (four state monitored) and 8 outputs (single change over pole relays).
Granta Cards and Tags Type 0928-0 Order No. GBI: 51-501 Active card The 0928-0 is a factory-encoded active card that includes a lithium battery which enables it to provide hands-free functionality when it is used together with Cotag hands-free readers. When it is used with a Cotag hands-free reader‚ the reading range is up to 1 metre. With Cotag proximity readers‚ the reading range is up to 30 cm.
Granta Cards and Tags Type 0958-101 Order No. Ten-pack of ISO thin cards (unprog.) 3 GBI: 51-303 The 0958-101 is a factory-encoded ISO laminated passive card that does not include a battery. It is ideal for photo ID applications as it can be custom-printed. When it is used with a Cotag hands-free reader‚ the reading range is approximately 33 cm. With Cotag proximity readers‚ the reading range with the 0958-101 varies between 3 and 10 cm. Quantity in order: 10 Dimensions (W x H x D) 0940 54 x 86 x 0.
Granta Accessories Type 4910 Order No. Power supply with battery backup GBI: 50-151 The 4910 power supply can power up to five Granta controllers (not including electric door releases or third-party readers). It has a 12Vdc 5Amp rating and provides battery backup in case of a power outage. Dimensions 4911 114 x 346 x CXC mm Power supply without battery backup GBI: 50-152 The 4911 power supply can power up to five Granta controllers (not including electric door releases or third-party readers).
The smart choice for cost-efficient security management is Granta! Answers for infrastructure. Granta is a modular access control and security management system that supports sites that range in size from as few as four doors to up to 4,096 doors and 100,000 cardholders. It offers multisystem management functionality and is easy to integrate with CCTV, intrusion and other systems.
Achieve the perfect balance between security and accessibility
SiPass integrated Tailor-made security systems for demanding organizations of any size SiPass® integrated is a powerful and almost infinitely flexible access control system that provides a very high level of security without compromising convenience and ease of use for system users. It is designed to meet access control needs that range in complexity from medium to very high.
SiPass integrated Diagrams WAN/LAN USB Camera IP Camera SIMATRIX SISTORE DVR Camera Corporate HR database Camera Visitor management workstation Graphic workstation SPC or Sintony control panel Video surveillance workstation with video surveillance interface Camera AC5200 SiPass integrated server AC5102 ADE5300 AR6182-MX AR6182-MX SiPass integrated Visitor client Management AR6181-MX ADD5100 AR6182-MX arming/disarming ADD5100 AR6182-MX arming/disarming AR6181-MX AR6181-MX SiPass integrat
SiPass integrated Core Software Type ASL5000.. Order No. SiPass integrated software licenses ASL5000.. The SiPass integrated software is the heart of any SiPass integrated system. The total number of controllers that can be connected is virtually unlimited. The Windows-certified software has a powerful client/server architecture‚ and it is easy to install and administer via its graphical user interface.
SiPass integrated Core Software Type ASL5000-ST Order No. SiPass integrated software D Starter edition license S54511-P2-A1 See ASL5000.. for technical overview and note the additional / other specifications: The Starter edition license includes: V V V V 16 doors 1‚000 cards One SiPass integrated server One SiPass integrated workstation Note that no options are available with the Starter edition license.
SiPass integrated Core Software Type ASL5000-UO Order No. Upgrade license - SiPass integrated Standard to SiPass integrated Optima 6FL7820-8AB10 4 See ASL5000.. for technical overview and note the additional / other specifications: This license allows the upgrade from SiPass integrated Standard edition to SiPass integrated Optima edition. To order the ASL5000-UO or any of the SiPass integrated core software‚ you must first complete a software license order form.
SiPass integrated Core Software Type Order No.
SiPass integrated Software Extensions Type ASE5100-BA Order No. Database extension license for 1‚000 cards 6FL7820-8AD10 The ASE5100-BA is a 1‚000 card database extension from the initial 1‚000 cards that are included in the standard license. 4 To order the SiPass integrated software extensions‚ you must first complete a software license order form. Please contact your SiPass integrated supplier for further information.
SiPass integrated Software Extensions Type ASE5300-AI Order No. APOGEE interface license P24246-P2800-B1 The APOGEE interface allows you to monitor alarms raised in the SiPass integrated system directly from your APOGEE Insight Workstation‚ and also acknowledge these alarms from that same workstation without switching systems. This same concept also extends to the monitoring of point states.
SiPass integrated Software Extensions Type ASE5300-CB Order No. CCTV third-party interface license 6FL7820-8AE26 SiPass integrated video surveillance offers an interface to a number of video surveillance systems. The settings and configurations for cameras and monitors are directly made from the SiPass integrated system. The image sequences can be displayed from the SiPass integrated graphical user interface (GUI) or a standard CCTV monitor.
SiPass integrated Software Extensions Type ASE5300-GP Order No. Graphics license 6FL7820-8AE17 The ASE5300-GP software provides security operators with a method of visually monitoring the status of a room‚ a building or an entire facility and the ability to perform routine tasks with a single click of the mouse button. To order the SiPass integrated software extensions‚ you must first complete a software license order form. Please contact your SiPass integrated supplier for further information.
SiPass integrated Software Extensions Type ASE5300-HL Order No. High-level elevator management interface license 6FL7820-8AE07 The generic high-level elevator interface (HLI) allows any facility to create a link between their SiPass integrated system and their elevator management system (EMS) for the purpose of controlling access to floors.
SiPass integrated Software Extensions Type ASE5300-LE Order No. Low-level elevator management license 6FL7820-8AE06 Elevator systems pose a unique challenge to a secure facility. The access control system must simultaneously provide a integrated interface to both the elevator management system (EMS) and the security operator for effective access control to floors. With the SiPass integrated low-level interface‚ the SiPass integrated advanced central controller operates as the elevator controller.
SiPass integrated Software Extensions Type ASE5300-MF Order No. Message forwarding license 6FL7820-8AE03 Providing security around the clock is a challenge for every facility. The high cost of employing security guards overnight is prohibitive‚ but the risks of potential security breaches when the site is unmanned are huge. The SiPass integrated message forwarding option solves this problem.
SiPass integrated Software Extensions Type ASE5300-TE Order No. Additional site/facility code license 6FL7820-8AE24 SiPass readers are the best choice for use in combination with SiPass integrated software‚ as they do not require any site or facility code. This is not the case for some third-party readers*‚ which require this license for each site or facility code. * Please contact your SiPass integrated supplier for further information.
SiPass integrated Firmware Type AEU5000-AF Order No. Firmware upgrade from SR34i/4 to ACC-4 P54511-P7-A1 This firmware is used to upgrade an SR34i-4 to an ACC-4 for use with SiPass integrated. AEU5000-AE Firmware upgrade from SR34i/8 to ACC-8 4 P54511-P8-A1 This firmware is used to upgrade an SR34i-8 to an ACC-8 for use with SiPass integrated. AEU5000-AS Firmware upgrate from SR34i/16 to ACC-16 P54511-P9-A1 This firmware is used to upgrade an SR34i-16 to an ACC-16 for use with SiPass integrated.
SiPass integrated Controllers Type AC5100 Order No. 6FL7820-8BA10 Advanced central controller The AC5100 advanced central controller can be programmed with up to 500‚000 cardholders and up to 96 doors. It has been specially designed for maximum flexibility‚ and provides six separate field level network (FLN) channels. Each FLN is capable of hosting up to 16 local devices for access control‚ monitoring input devices or controlling output devices.
SiPass integrated Controllers Type AC5102 Order No. S54507-C22-A1 Advanced central controller The AC5102 advanced central controller can be programmed with up to 500‚000 cardholders and up to 96 doors. It has been specially designed for maximum flexibility‚ and provides six separate field level network (FLN) channels. Each FLN is capable of hosting up to 16 local devices for access control‚ monitoring input devices or controlling output devices.
SiPass integrated Controllers Type AC5160 Order No. 6FL7820-8BA16 SiPass integrated controller kit The AC5160 kit consists of an AC5100 controller and two dual-reader interfaces (DRI) in one enclosure. The components and a power supply are pre-assembled and wired. The architecture of the housing and the included accessory kit allows for an easy and quick installation. As all modules are pre-assembled only the connection to the power supply and the readers has to be established.
SiPass integrated Controllers Type AC5200 Order No. S54507-C5-A1 ACC-Lite The AC5200 is a smaller version of Siemens’ high-performance IP-based advanced central controller models (AC5100 and AC5102). It can manage up to 40‚000 cardholders. 4 The ACC-Lite has been specially designed to provide a low-cost alternative for smaller or branch installations.
SiPass integrated Door Modules Type ADS5200 Order No. Single reader interface module including base plate 6FL7820-8CA20 The ADS5200 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5100‚ ADS5102 or AC5200) for one card reader. When a cardholder presents an access card at an entry or exit reader the ADS5200 reader interface interprets the encoded information and sends this data to the controller.
SiPass integrated Door Modules Type ADS5210 Order No. Single reader interface module including base plate and plastic housing 6FL7820-8CA21 4 The ADS5210 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5100‚ AC5102 or AC5200) for one card reader. When a cardholder presents the access card at an entry or exit reader the ADS5210 reader interface interprets the encoded information and sends this data to the controller.
SiPass integrated Door Modules Type ADD5100 Order No. Dual reader interface including base plate 6FL7820-8CA10 The ADD5100 provides an interface between a card reader and the advanced central controller (AC5100‚ AC5102 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5100 reader interface interprets the encoded information and sends this data to the controller.
SiPass integrated Door Modules Type ADD5110 Order No. Dual reader interface including base plate and plastic housing 6FL7820-8CA11 The ADD5110 provides an interface between a card reader and the advanced central controller (AC5100‚ AC5102 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5110 reader interface interprets the encoded information and sends this data to the controller.
SiPass integrated Door Modules Type ADD5160 Order No. Dual reader interface module in weatherproof housing 6FL7820-8CA16 The ADD5160 provides an interface between a card reader and the advanced central controller (AC5100‚ AC5102 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5160 reader interface interprets the encoded information and sends this data to the controller.
SiPass integrated Door Modules Type ADD5190 Order No. Dual reader interface module in cabinet S54505-C16-A1 The ADD5190 provides an interface between a card reader and the central controller (AC5100‚ AC5102 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5190 reader interface interprets the encoded information and sends this data to the central controller.
SiPass integrated Door Modules Type ADE5300 Order No. Eight-reader interface‚ including base plate S24246-A2500-A1 The ADE5300 provides a local interface between the advanced central controller (AC5100‚ AC5102 or AC5200) and up to 8 card readers. From the ADE5300‚ the information held within the access cards is transmitted to the controller. Each time an access attempt is made the controller verifies the data on the ID card and will then either allow or deny access.
SiPass integrated Door Modules Type DC12 Order No. Door controller for use with reader(s) S24246-C8502-A1 The DC12 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC12 can support two readers and thereby control both entries and exits to a restricted area (anti-passback). 4 The DC12 includes an integrated status display window to simplify installation and service.
SiPass integrated Door Modules Type DC22 Order No. Door controller with alarm control functions S24246-C8503-A1 The DC22 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC22 can support two readers and thereby control both entries and exits to a restricted area (anti-passback). The DC22 includes an integrated status display window to simplify installation and service.
SiPass integrated Signal Modules Type AFI5100 Order No. Input point module including base plate 6FL7820-8CB10 The AFI5100 is a programmable input controller used as part of a SiPass integrated system. It provides a local interface between the advanced central controller (AC5100‚ AC5102 or AC5200) and the devices used to monitor a facility‚ such as infrared detectors.
SiPass integrated Signal Modules Type AFO5100 Order No. Output point module (16/16) including base plate 6FL7820-8CC10 The AFO5100 is an advanced‚ multi-purpose module that provides an interface between powered field-level input contact devices (such as elevator buttons) and output devices (such as override mechanisms) to the advanced central controller (AC5100‚ AC5102 or AC5200). It is designed for use in elevators that are integrated within an access control environment.
SiPass integrated Signal Modules Type AFO5200 Order No. Output point module (8/8) including base plate S24246-A2600-A1 The AFO5200 is an advanced‚ multi-purpose module that provides an interface between field-level input devices (such as passive infrared detectors) and output devices (such as locking devices) to the advanced central controller (AC5100‚ AC5102 or AC5200).
SiPass integrated Signal Modules Type IOR6 Order No. S24246-C8501-A1 IO relay central IOR6 is a general relay central designed for use with SiPass Entro and SiPass integrated. Its four inputs and six outputs can be used for applications such as common alarm outputs‚ fire alarm inputs‚ elevator control‚ machine control or door control (in reservation applications). IOR6 can also be used for timer functions.
SiPass integrated Terminals Type ATI5100 Order No. S24246-F2605-A1 Intrusion arming terminal ATI5100 is a field terminal designed for use with SiPass integrated. It acts as a local interface between an advanced central controller (AC5100‚ AC5102 or AC5200) and authorised cardholders‚ enabling them to carry out tasks such as arming and disarming intrusion alarm areas.
SiPass integrated Kits Type AK5000-CO Order No. SiPass integrated Cotag Cards Kit S54511-S11-A1 The Cotag Cards Kit includes: V 1‚000 IB958M passive Cotag cards with magnetic stripe V One Database extension license for 1‚000 cards (ASE5100-BA) Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.
Add SPC to SiPass integrated and the result is extraordinary! Answers for infrastructure. When you add SPC to SiPass integrated you get a great deal more than the obvious advantages of a cutting-edge intrusion detection system and a world-class access control system. The synergies between these two systems put all the power of a fully interoperable security management system in the palm of your hand.
Choose SiPass readers for ultimate convenience and cost-efficiency
SiPass readers Robust, reliable and easy to use Siemens provides a wide range of readers to satisfy the access control requirements of most environments. Our readers can work with virtually any access control system on the market, but they are specifically tested and qualified for use with SiPass systems. Designed for easy installation and use, the SiPass reader portfolio includes technologies ranging from magnetic stripe to 125 kHz proximity, multi-purpose smart card technology, and Cotag technology.
Readers Cotag Type HF500-Cotag Order No. S24246-F4106-A1 Hands-free reader The HF500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. It has a reading range of up to 102 cm with an active card and 34 cm with a passive card. It can read through concrete‚ wood‚ glass and many other materials‚ but not metal. Although it must be mounted indoors‚ it can also read cards presented from outside‚ if the environment permits.
Readers Cotag Type BC5511-Cotag Order No. S24246-F4701-A1 Split-mounted hands-free reader The BC5511-Cotag is a hands-free card reader kit that consists of the BC5311 reader interface (mounted indoors) and the HF100 reader (mounted outdoors). It reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and costefficiency. It has a reading range of up to 90 cm with an active card and 35 cm with a passive card.
Readers Cotag Type BC5516-Cotag Order No. Split-mounted hands-free loop reader kit S24246-F4702-A1 The BC5516-Cotag is a loop reader kit that consists of a BC270 loop coupler and a BC5311 reader interface. It reads Siemens unique Cotag cards and tags (active only) which offer ultimate convenience and costefficiency. It has a reading range of up to three meters depending of the construction of the loop.
Readers Cotag Type PP500-Cotag Order No. S54501-F1-A2 Heavy duty card and PIN reader The PP500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. It has a reading range of up to 12 cm with an active card and up to 3 cm with a passive card. It has a position indicator light and an illuminated keypad which makes it easy to use in dark places. It also includes a tamper switch for enhanced security.
Readers Cotag Type PR500-Cotag Order No. S24246-F4706-A1 Card reader The PR500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. It has a reading range of up to 32 cm with an active card and 11 cm with a passive card. The PR500-Cotag has a slim and compact design and blends in well in many environments. When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller.
Readers Cotag Type SP500-Cotag Order No. S24246-F4704-A1 Switch-plate card reader The SP500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. It has a reading range of up to 29 cm with an active card and 9 cm with a passive card. Its compact‚ square design makes it easy to mount in most single-gang back-boxes.
Readers Cotag Type HD500-Cotag Order No. S24246-F4703-A1 Heavy duty card reader The HD500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. It has a reading range of up to 26 cm with an active card and up to 8 cm with a passive card. Vandal-proof and fire-resistant‚ the HD500-Cotag is popular both in vulnerable locations and modern office environments.
Readers Cotag Type PM500-Cotag Order No. S24246-F4705-A1 Panel mounted card reader The PM500-Cotag reads Siemens unique Cotag cards and tags (both active and passive) which offer ultimate convenience and cost-efficiency. The PM500-Cotag is designed to fit most remote call point enclosures. It is supplied with a custom-machined perspex front panel for increased aesthetic appeal. It has a reading range of up to 23 cm with an active card and 8 cm with a passive card.
Readers Smart Card 13.56 MHz Type AR6181-MX Order No. 6FL7170-8BK Multi-technology card reader The AR6181-MX can read a variety of different smart card variants (see details below). The smart two-part construction of this reader makes it very easy to mount. It is supplied with a surface mounting frame.
Readers Smart Card 13.56 MHz Type AR6182-MX Order No. Multi-technology card and PIN reader 6FL7170-8BL The AR6182-MX can read a variety of different smart card variants (see details below). The smart two-part construction of this reader makes it very easy to mount. It is supplied with a surface mounting frame.
Readers Smart Card 13.56 MHz Type AR6181-MS Order No. 6FL7170-8AH Card reader The AR6181-MS can read Mifare Classic 1k and 4k cards (CSN or sector/block) and Mifare DESfire EV1 (CSN‚ File). It is designed to fit most standard square flush-mounting boxes. It is supplied with a surface mounting frame.
Readers Smart Card 13.56 MHz Type AR6182-MS Order No. 6FL7170-8AJ Card and PIN reader The AR6182-MS can read Mifare Classic 1k and 4k cards (CSN or sector/block) and Mifare DESfire EV1 (CSN‚ File). It is designed to fit most standard square flush-mounting boxes. It is supplied with a surface mounting frame.
Readers Smart Card 13.56 MHz Type AR6111-MX Order No. 6FL7170-8DK Card reader The AR6111-MX is an economical card reader that can read the card serial number of a variety of different smart card variants (see details below). The configuration of this reader can be changed with a configuration card. It is supplied with a surface mounting frame.
Readers Smart Card 13.56 MHz Type AR6201-MX Order No. 6FL7170-8CK Enrolment reader The AR6201-MX is designed to read and write a variety of different smart card variants (see details below). It is supplied with an external power supply and an RS232 serial interface‚ which enables it to be connected to a PC.
Readers Proximity 125 kHz Type AR6181-RX Order No. 6FL7170-8AD Multi-technology card reader The AR6181-RX can read the unique card number of EM4102 (also known as Miro or UNIQUE 125 kHz)‚ Siemens Prox‚ Hitag 1 and Hitag 2 proximity cards. It can also read the personalised ID number of Hitag 1 and Hitag 2 cards. The smart two-part construction of this reader makes it very easy to mount. It is supplied with a surface mounting frame.
Readers Proximity 125 kHz Type AR6182-RX Order No. Multi-technology card and PIN reader 6FL7170-8AE The AR6182-RX can read the unique card number of EM4102 (also known as Miro or UNIQUE 125 kHz)‚ Siemens Prox‚ Hitag 1 and Hitag 2 proximity cards. It can also read the personalised ID number of Hitag 1 and Hitag 2 cards. The smart two-part construction of this reader makes it very easy to mount. It is supplied with a surface mounting frame.
Readers Proximity 125 kHz Type ARS6311-RX Order No. S24246-Z3900-A1 Card reader The ARS6311-RX is a compact and economical reader designed for use with all SiPass systems. In combination with the AC6311 I/O board‚ it can also be used in standalone mode.
Readers Proximity 125 kHz Type AR6331-CP Order No. 6FL7171-8AD Card reader The AR6331-CP reads Siemens Prox card technology. The smart twopart construction of this reader makes it very easy to mount. It includes a tamper switch for enhanced security.
Readers Proximity 125 kHz Type AR6332-CP Order No. 6FL7171-8AE Card and PIN reader The AR6332-CP reads Siemens Prox card technology. The smart twopart construction of this reader makes it very easy to mount. It includes a tamper switch for enhanced security.
Readers Proximity 125 kHz Type PP500-EM Order No. S54501-F1-A1 Heavy-duty card and PIN reader The PP500-EM reads EM4102 cards (also known as Miro or UNIQUE 125 kHz). It has a position indicator light and an illuminated keypad which makes it easy to use in dark places. It also includes a tamper switch for enhanced security. 5 When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller.
Readers Proximity 125 kHz Type HD500-EM Order No. S24246-F3901-A1 Heavy-duty card reader The HD500-EM reads EM4102 cards (also known as Miro or UNIQUE 125 kHz). Vandal-proof and fire-resistant‚ it is popular both in vulnerable locations and modern office environments. When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller. An additional benefit of BC-Link is that it supports online status monitoring.
Readers Proximity 125 kHz Type PR500-EM Order No. S24246-F3913-A1 Card reader The PR500-EM reads EM4102 cards (also known as Miro or UNIQUE 125 kHz). It has slim and compact design and blends in well in many environments. When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller. An additional benefit of BC-Link is that it supports online status monitoring.
Readers Proximity 125 kHz Type SP500-EM Order No. S24246-F3902-A1 Switch-plate card reader The SP500-EM reads EM4102 cards (also known as Miro or UNIQUE 125 kHz). Its compact‚ square design makes it easy to mount in most singlegang back-boxes. When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller. An additional benefit of BC-Link is that it supports online status monitoring.
Readers Proximity 125 kHz Type PM500-EM Order No. S24246-F3903-A1 Panel-mounted card reader The PM500-EM reads EM4102 cards (also known as Miro or UNIQUE 125 kHz). It is designed to fit most remote call point enclosures. It is supplied with a custom-machined perspex front panel for increased aesthetic appeal. 5 When BC-Link is used‚ two of these readers can be installed to control entries and exits using only one door controller.
Readers Magnetic Stripe Type BC43 Order No. S24246-F4101-A1 Card and PIN reader BC43 is a card and PIN reader for SiPass Entro. Two units can be installed to control entries and exits using only one door controller. It has an illuminated keypad which makes it easy to use in dark places.
Readers PIN Reader Type M43 Order No. S24246-F8400-A1 PIN only reader In a SiPass Entro system‚ the M43 is used primarily in two situations: when you only require the group code level in the system‚ or when you want to add PIN code functionality to a door that already has a cardonly reader installed.
Use Cotag active cards and tags for a truly hands-free access control environment
SiPass cards and tags Hands-free, proximity or multi-purpose? Take your pick. Siemens recommends Cotag, smart card or standard proximity (125 kHz) technology for new access control installations. We can also provide magnetic stripe cards for use in existing magnetic stripe systems. Cotag is a very convenient and user-friendly card technology that is unique on the market. When Cotag technology is used, it is possible to have both proximity and hands-free card reading in the same system.
Cards and Tags Cotag Type IB928 Order No. S24246-D5203-A1 Active Cotag clamshell card The IB928 is a factory-encoded active card that includes a lithium battery which enables it to provide hands-free functionality when it is used together with Cotag hands-free readers. For example‚ the combination of the IB928 card and the HF500-Cotag reader results in a reading range of approximately 102 cm.
Cards and Tags Cotag Type IB968 Order No. S54501-S10-A1 Passive Cotag clamshell card The IB968 is a factory-encoded passive card that does not include a battery. It can be used in combination with any Cotag reader. When it is used with a Cotag hands-free reader‚ the reading range is approximately 34 cm. With Cotag proximity readers‚ the reading range with the IB968 varies between 3 and 11 cm.
Cards and Tags Cotag Type IB981 Order No. S54501-N7-A1 Passive Cotag keyring tag The IB981 is a factory-encoded passive tag that does not include a battery. It can be used in combination with any Cotag reader. When it is used with a Cotag hands-free reader‚ the reading range is approximately 29 cm. With Cotag proximity readers‚ the reading range with the IB981 varies between 2 and 9 cm.
Cards and Tags Smart Card 13.56 MHz Type ABP5100-PR Order No. 6FL7820-8KB10 Pre-printed Mifare cards This is a set of pre-printed Mifare Classic 1k ISO cards. They are suitable for use with all SiPass Smart Card readers. Quantity in order: 10 Dimensions (W x H x D) 54 x 86 x 0.76 mm 6 ABP5100-BL 6FL7820-8KB20 Printable Mifare cards This is a set of blank‚ printable Mifare Classic 1k ISO cards. They are suitable for use with all SiPass Smart Card readers.
Cards and Tags Proximity 125 kHz Type ABR5100-PR Order No. 6FL7820-8KA10 Pre-printed Siemens Prox cards This is a set of pre-printed ISO cards that are compliant with Siemens Prox technology. They can be used with the readers ARS6311-RX‚ AR6331-CP‚ AR6332-CP‚ AR6181-RX and AR6182-RX. Note: The card number is printed on the back of each card. Quantity in order: 10 Dimensions (W x H x D) ABR5100-BL 54 x 86 x 0.
Cards and Tags Proximity 125 kHz Type IB41-EM Order No. Pre-printed EM laminated card with print S24246-D4904-A1 The IB41-EM is a pre-printed ISO card that is compliant with EM4102 reading technology. It also includes a magnetic stripe. It can be used with the readers HD500-EM‚ PM500-EM‚ PR500-EM‚ SP500-EM‚ PP500EM. Note: The card number is printed on the back of the card. Quantity in order: 1 Dimensions (W x H x D) IB42-EM 6 54 x 86 x 0.
Cards and Tags Proximity 125 kHz Type IB45-EM Order No. S24246-D4903-A1 EM adhesive tag The IB45-EM is an adhesive tag with Siemens logo that is compliant with EM4102 reading technology. It is intended to be attached to existing magnetic stripe cards when adding EM4102 readers to an existing magstripe installation. It can be used with the readers HD500-EM‚ PM500-EM‚ PR500-EM‚ SP500-EM‚ PP500-EM. Note: The card number is printed on the back of the tag.
Cards and Tags Magnetic Stripe Type IB1 Order No. S24246-D5000-A1 Magnetic stripe cards This is a set of 100 Siemens-branded magnetic stripe cards with CR80 ISO format (track 2). Note: The card number is printed on the back of each card. Quantity in order: 100 Dimensions (W x H x D) © Siemens Switzerland Ltd 2011 54 x 86 x 0.
SiPass Entro – The perfect choice for retail environments
Accessories Siemens offers a wide range of high-quality accessories, including covers, flush-mounting kits, interfaces, nameplates, cables, transformers and other products.
Accessories Covers Type SH1 Order No. S24246-Z3652-A1 Universal rain cover SH1 is a universal protective cover for card readers. It is recommended for outdoor installations. Dimensions (W x H x D) SH2 210 x 225 x 160 mm Rain cover for readers and codelocks S24246-Z3554-A1 SH2 is a protective cover for K42‚ K44Duo‚ M43‚ PP500-EM and PP500Cotag. There are cuttings for cables to simplify the process of adding it to an existing installation.
Accessories Covers Type IS391 Order No. S24246-Z3551-A1 Spy-proof cover IS391 is designed for use where higher security is needed. It can be used with K42‚ K44Duo‚ M43‚ PP500-EM and PP500-Cotag. It prevents others from seeing which buttons the user presses on the keypad.
Accessories Flush Mounting Kits Type BB3 Order No. S24246-Z3552-A1 Flush-mounting kit BB3 is a flush-mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the K42‚ K44Duo‚ M43‚ PP500-EM and PP500-Cotag.
Accessories Flush Mounting Kits Type BB5 Order No. S24246-Z5401-A1 Flush-mounting kit BB5 is a flush-mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the BM3‚ BM31‚ BT41‚ BT44 and BTK41. Dimensions (W x H x D) 117 x 260 mm (external) 85 x 235 x 33 mm (recess) 7 BB6 S24246-Z3553-A1 Flush-mounting kit BB6 is a flush-mounting kit designed to provide a discreet and secure installation of PR500-EM and PR500-Cotag. It hides the reader.
Accessories Interfaces Type CR1 Order No. S24246-C3651-A1 Converter for BC615 readers CR1 is required when a BC615‚ BC615-EM or BC615-Cotag is connected to a SiPass Entro segment controller. It converts between RS232 and RS485. Dimensions (W x H x D) IF1 120 x 80 x 40 mm SiPass Entro interface box with cable S24246-Z8352-A1 IF1 is an interface box that enables the easy connection of a PC (or printer) to a SiPass Entro segment controller. It is supplied with a 15meter-long cable (not shown).
Accessories Nameplates Type NTFlex Order No. S24246-Z5403-A1 Nameplate This nameplate is made of rugged metal and unbreakable glass. It is intended for use with laserprinted sheets. It includes a CD-ROM with ready-made templates in MS Word for 12‚ 21 or 30 rows. Dimensions (W x H x D) 170 x 263 x 20 mm 7 NTFlex Gold S24246-Z5406-A1 Nameplate in gold colour This nameplate is made of rugged gold-coloured metal and unbreakable glass. It is intended for use with laserprinted sheets.
Accessories Nameplates Type Sheets Order No. 20 extra sheets for use with NTFlex nameplate S24246-Z5405-A1 This package includes 20 extra sheets for use with an NTFlex nameplate and a CD-ROM with ready-made templates in MS Word for 12‚ 21 or 30 rows.
Accessories Other Products Type ACK5100 Order No. SiPass integrated parameterization cable 6FL7820-8FB10 ACK5100 is used to create a serial connection between a PC and the AC5100 advanced central controller for configuration. ACK5110 6FL7820-8FB11 SiPass integrated modem cable 7 ACK5110 is used to create a serial connection between the AC5100 advanced central controller and a modem using a DB25 connector.
Accessories Other Products Type E7 Order No. S24246-Z3555-A1 Multi-relay E7 is used for special applications such as achieving a voltage-free connection. It includes two separate outputs. The user can select either voltage or potential-free output (removable jumpers). Weight SK5 0.07 kg S54513-C7-A1 Security unit SK5 eliminates the possibility of opening a lock by using battery power directly on the outgoing lock cables.
Demo equipment Siemens offers a range of portable SiPass demo cases that can be used to demonstrate product functionality to customers. All of our demo cases are very compact and easy to transport from one customer site to another. They are an excellent tool for salespeople as they enable customers to very quickly gain a hands-on understanding of how the SiPass range of products work and what they look like in real life.
Demo Equipment Demo Cases Type SiPass Entro D. C. Order No. S24246-D8351-A1 SiPass Entro demo case This heavy-duty demo case with aluminium trim features a complete three-door SiPass Entro system. It also includes an IOR6‚ which can be used to demonstrate elevator control or alarm outputs.
Type Index Type Description Order No. 0270 Loop coupler GBI: 21-408 Page 3-9 0928-0 Active card GBI: 51-501 3-12 0940 Wrist tag GBI: 51-900 3-13 0958-101 Ten-pack of ISO thin cards (unprog.) GBI: 51-303 3-13 0968-0 Ten-pack of passive Cotag clamshell cards (unprog.) GBI: 51-108 3-12 3-12 0981 Ten-pack of passive Cotag key-ring tags (unprog.
Type Index Type Description Order No. Page AFO5200 Output point module (8/8) including base plate S24246-A2600-A1 4-31 AK1110-CO DC800 / PR500-Cotag Door Kit S54507-S6-A1 1-10 AK1110-EM DC800 / PR500-EM Door Kit S54507-S2-A4 1-10 AK1111-CO DC800 / PR500-Cotag Door Kit (incl. PSU) S54507-S25-A1 1-10 AK1112-CO DC800 / HD500-Cotag Door Kit (incl.
Type Index Type Description Order No.
Type Index Type Description Order No.
Type Index Type Description Order No. SH1 Universal rain cover S24246-Z3652-A1 Page 7-2 SH2 Rain cover for readers and codelocks S24246-Z3554-A1 7-2 SH3 Rain cover for door entry phones S24246-Z5400-A1 7-2 SH4 Rain cover for card readers S24246-Z3655-A1 7-2 Sheets 20 extra sheets for use with NTFlex nameplate S24246-Z5405-A1 7-8 SiPass Entro SiPass Entro software SiPass Entro 2-3 SiPass Entro D. C. SiPass Entro demo case S24246-D8351-A1 8-2 SiPass integrated D. C.
Siemens AB Industry Sector Building Technologies Division Security Products Englundavägen 7 Box 1275 17124 Solna Sweden Tel: +46 8 629 0300 Fax: +46 8 627 0096 Siemens AG Industry Sector Building Technologies Division Fire Safety & Security Products Siemensallee 84 76187 Karlsruhe, Deutschland Tel.